M12×1.75 is one of the standard coarse-thread sizes for male-to-female thread adapters under Trade series (male-to-female thread adapters). The sections below reproduce the dimensional row, list the matching tools and hole sizes, and summarize where this size is normally specified.
M12×1.75 Dimensional Row (Trade series (male-to-female thread adapters))
| Male thread example | Female thread example | Female length (in) | Hex length (in) | Across flats (in) | Male length (in) | Material options |
|---|
| M12×1.75 | 1/4-32 UNEF | 3/8 | 1-1/2 | 3/4 | 7/8 | 303 / A2 / A4 stainless; aluminum; black-oxide or zinc-plated steel |
Spanner & Drive for M12×1.75 Male-to-Female Thread Adapters
Drive geometry for M12×1.75 Male-to-Female Thread Adapters is given by the row above; match the tool to the listed values.
M12×1.75 Male-to-Female Thread Adapters Weight
A steel M12×1.75 male-to-female thread adapters at the listed 38 mm length weighs approximately 3,473 g each — about 3,473 kg per 1,000 pieces. Stainless A2/A4 weighs roughly the same (density 7.9–8.0 g/cm³).
Actual weight varies slightly with head form, thread and finish; use this figure for freight estimation only.
Installation Tips for M12×1.75 Male-to-Female Thread Adapters
- At M12×1.75 the stretch in the bolt becomes the controlling factor — for critical joints, use angle-controlled or stretch-controlled tightening instead of pure torque.
Mating Parts for M12×1.75
For M12×1.75, pair with a M12×1.75 hex nut (ISO 4032 / DIN 934) and, where used, a M12×1.75 flat washer (ISO 7089 / DIN 125A) under the head and under the nut.
Custom manufacturing · Made to drawing
Need male-to-female thread adapters in a size this table does not list?
This page covers M12×1.75 male-to-female thread adapters. Head form and drive can be specified to the assembly rather than to a standard: a larger bearing face, a security drive, or a socket sized for the tool already on the bench. Made by cold heading or hot forging.
Minimum order from 2,000 pieces; samples within 7 days of drawing approval.
Custom bolt manufacturingSend a drawing
Applications & Industries for M12×1.75 Male-to-Female Thread Adapters
The sectors that buy Male-to-Female Thread Adapters, and the duty each one buys them for. Stocked from M12×1.75 to 6-32 through 1/2-13 (screw size).
Industries that specify Male-to-Female Thread Adapters
-
Instrumentation
Hex bodies provide wrench access between metric and inch fittings.
-
Repair fabrication
Adapters avoid remachining a replacement part when the threads differ.
-
Machine assembly
303 or A2/A4 stainless options suit clean or corrosive environments.
-
Test fixtures
Male-to-female adapters bridge incompatible thread systems during equipment integration.
-
Automotive & transport
Chassis, driveline and body fixings that see vibration and are assembled to a controlled preload.
-
Steel fabrication
Bolted connections in frames, enclosures, walkways and weldments, on the bench and on site.
Typical applications
- using the hex body for installation and removal
- checking male and female pitch independently
- selecting adapter length and across-flats for the available clearance
- joining a male metric thread to a female inch thread
- bolting brackets, motors and gearboxes to a frame
- assemblies that are dismantled for service and re-torqued
Service conditions to specify against
- Marine and coastal
- Available in A4 (316) stainless for chloride exposure — coastal structures, pool halls, water treatment and deck hardware, where A2 will eventually pit.
- High load
- Supplied in ISO 898-1 property classes, so the joint can be designed to a stated proof load and tightened to a calculated torque rather than by feel.
- Torque and preload
- The joint is designed around bolt tension, so lubrication, coating and the friction coefficient all change the torque figure — state them together.
Where to use something else
- Do not force unlike thread forms together; verify pitch, diameter, class and sealing method before tightening.
- Do not use a machine thread into unthreaded sheet or timber; use a tapping screw, rivet nut or insert made for that parent material.
Full application guide: where Male-to-Female Thread Adapters are used, how to specify them, and the cases they are wrong for