Dimensional data for M2 Flat Washers. Selection is by nominal bolt size rather than by thread, so the controlling figures are the ones in the row below together with the fit and tolerance the mating feature requires.
M2 Dimensional Row (ISO 7089 / ISO 7093)
For bolt size
Inner diameter d1 min (mm)
Outer diameter d2 max (mm)
Thickness h (mm)
Reference standard
M2
2.2
5.0
0.3
ISO 7089
Common Applications for M2 Flat Washers
M2 Flat Washers are commonly specified for small electronics hardware and precision assemblies.
Mating Parts for M2
A M2 flat washer pairs with a M2 bolt/screw and matching M2 nut.
Technical Drawing
Customize the parameters below — every spec field is editable, and the drawing redraws to match the values you choose. Changing the size will snap the other fields to that size's standard values; you can then override any individual value.
Sends the selected values to the quote form below.
Request a Quote
The form below follows the current technical drawing configuration. Change the drawing values above and the request details update automatically.
Dimensions & Specifications (ISO 7089 / ISO 7093)
For bolt size
Inner diameter d1 min (mm)
Outer diameter d2 max (mm)
Thickness h (mm)
Reference standard
M1.6
1.7
4.0
0.3
ISO 7089
M2
2.2
5.0
0.3
ISO 7089
M2.5
2.7
6.0
0.5
ISO 7089
M3
3.2
7.0
0.5
ISO 7089
M3.5
3.7
8.0
0.5
ISO 7089
M4
4.3
9.0
0.8
ISO 7089
M5
5.3
10.0
1.0
ISO 7089
M6
6.4
12.0
1.6
ISO 7089
M7
7.4
14.0
1.6
ISO 7089
M8
8.4
16.0
1.6
ISO 7089
M10
10.5
20.0
2.0
ISO 7089
M12
13.0
24.0
2.5
ISO 7089
M14
15.0
28.0
2.5
ISO 7089
M16
17.0
30.0
3.0
ISO 7089
M18
19.0
34.0
3.0
ISO 7089
M20
21.0
37.0
3.0
ISO 7089
M22
23.0
39.0
3.0
ISO 7089
M24
25.0
44.0
4.0
ISO 7089
M27
28.0
50.0
4.0
ISO 7089
M30
31.0
56.0
4.0
ISO 7089
M33
34.0
60.0
5.0
ISO 7089
M36
37.0
66.0
5.0
ISO 7089
M39
40.0
72.0
6.0
ISO 7089
M42
43.0
78.0
7.0
ISO 7089
M45
46.0
85.0
7.0
ISO 7089
M48
50.0
92.0
8.0
ISO 7089
M52
54.0
98.0
8.0
ISO 7089
M56
58.0
105.0
9.0
ISO 7089
M60
62.0
110.0
9.0
ISO 7089
M64
66.0
115.0
9.0
ISO 7089
M5
5.3
15.0
1.0
ISO 7093 large series
M6
6.4
18.0
1.6
ISO 7093 large series
M8
8.4
24.0
2.0
ISO 7093 large series
M10
10.5
30.0
2.5
ISO 7093 large series
M12
13.0
37.0
3.0
ISO 7093 large series
M16
17.0
50.0
3.0
ISO 7093 large series
M20
21.0
60.0
4.0
ISO 7093 large series
M24
25.0
72.0
5.0
ISO 7093 large series
Materials & Grades
Select a material class to see the grades we supply it in. Each designation is listed with its ISO/EN, AISI/SAE, JIS and GB equivalents.
Third-party video, selected automatically for this topic. It is not produced by Engineering Hardware and is not a specification source — use the tables on this page for dimensional data.
Inside the plant
Manufactured in our own plant
This part is cold-formed, threaded, heat-treated and finished in-house. The stages below are where its class and finish are actually decided.
01
Cold heading
Wire rod is drawn to size and cold-formed into blanks. Forming rather than cutting keeps the grain flow continuous around the head, which is where a bolt is most likely to fail.
Head dimensions and under-head radius checked at set-up and per shift.
02
Thread rolling
Threads are rolled between hardened dies rather than cut. Rolled threads are stronger in fatigue than cut threads and hold pitch and flank angle far more consistently across a batch.
Go / no-go ring gauges to ISO 965 tolerance class 6g.
03
Heat treatment
Quench-and-temper brings carbon and alloy steel to the property class ordered — 8.8, 10.9 or 12.9 — with the furnace charge tracked so a finished lot can be traced back to it.
Core hardness and tensile tested per lot to ISO 898-1.
04
Surface treatment
Zinc, zinc-nickel, hot-dip galvanizing, black oxide, phosphate and Dacromet, selected against the service environment rather than against the price list.
Coating thickness and neutral salt spray hours to ISO 9227.
Frequently Asked Questions
What's the typical proof load behavior of M2 class 8.8?
Micro-thread joints are sensitive to plastic deformation in the first turn under load — use a torque-limiting driver and check the bearing surface deformation on softer mating materials.
Which washer dimensions matter most for M2?
For a flat washer, the outside diameter (the bearing surface) and the thickness control how the load is spread under the head and how much elastic preload is preserved. The inside diameter must clear the bolt body but not be so large that the head bears mostly on the washer's outer rim.
Is M2 Flat Washers suitable for electronics and small mechanisms?
M2 Flat Washers is in the micro range and is widely used in electronics, instrument enclosures and small precision mechanisms. Watch the over-torque margin — micro joints strip easily.
How do I request a quotation?
Use the technical drawing on this page to pick the exact configuration, then submit it with the quote form. We respond within one business day.
Need a fastener quote or a spec sheet?Message our engineers on WhatsApp — send a drawing or DIN number and get pricing back fast.Start WhatsApp Chat →
This website uses only necessary and functional cookies to operate, secure, and improve basic website performance.
We do not use advertising cookies, Google Analytics, or cross-site tracking technologies.
Privacy Policy
