A slotted pan head screw — gb/t 67 / iso 1580 (series 040 in M4: this guide pulls the row from the standard, adds the assembly numbers an engineer actually uses, and links you straight to a quote.
M4 Dimensional Row (GB/T 67 / ISO 1580)
| Size | Pitch (mm) | Length L (mm) | Head diameter dk (mm) | Head height k (mm) | Cross recess | Reference standard |
|---|---|---|---|---|---|---|
| M4 | 0.7 | 25 | 8.0 | 2.4 | PH2 | ISO 7045 / GB/T 818 |
Spanner & Drive for M4 Slotted Pan Head Screw — GB/T 67 / ISO 1580 (Series 040)
M4 Slotted Pan Head Screw — GB/T 67 / ISO 1580 (Series 040) use a PH2 cross recess. Match the driver bit to the recess (Phillips PH / Pozi PZ are NOT interchangeable).
Hole Sizes for M4
| Coarse-thread pitch (ISO 724) | 0.7 mm |
|---|---|
| Through-hole / clearance (ISO 273 medium) | 4.5 mm |
| Tapping drill, coarse thread | 3.3 mm |
Tightening Torque for M4
| Class 8.8 (dry, ~µ 0.125) | ≈ 2.9 Nm |
|---|---|
| Class 10.9 (dry, ~µ 0.125) | ≈ 4.1 Nm |
| Class 12.9 (dry, ~µ 0.125) | ≈ 4.9 Nm |
Indicative dry-joint values. Lubrication can lower the required torque by 15–25%. Always confirm against the joint design, especially when going up a strength class.
Common Applications for M4 Slotted Pan Head Screw — GB/T 67 / ISO 1580 (Series 040)
M4 Slotted Pan Head Screw — GB/T 67 / ISO 1580 (Series 040) are commonly specified for electronics, PCB hardware, optical mounts and small-scale machinery.
Mating Parts for M4
For M4, pair with a M4 hex nut (ISO 4032 / DIN 934) and, where used, a M4 flat washer (ISO 7089 / DIN 125A) under the head and under the nut.
When to Step Up or Down from M4
When the joint preload approaches the proof load of M4 class 8.8, step up to M5 class 8.8 (or move to M4 class 10.9). When the joint is over-specified, M3 often saves weight and cost without losing the safety margin.