M5 Hex Slotted Castle Nut (Type 2) (GB/T 6180 / ISO 7036) are specified by thread size, length and head dimensions. The M5 row from the standard is reproduced below, followed by the drill sizes, spanner size and torque values used when installing this size.
M5 Dimensional Row (GB/T 6180 / ISO 7036)
| Size | Pitch (mm) | Width across flats s (mm) | Width across corners e (mm) | Total height m (mm) | Slot width (mm) | Reference standard |
|---|---|---|---|---|---|---|
| M5 | 0.8 | 8.0 | 8.79 | 6.7 | 1.8 | ISO 7036 / GB/T 6180 |
Spanner & Drive for M5 Hex Slotted Castle Nut (Type 2) — GB/T 6180 / ISO 7036 (Series 050)
Drive geometry for M5 Hex Slotted Castle Nut (Type 2) — GB/T 6180 / ISO 7036 (Series 050) is given by the row above; match the tool to the listed values.
Common Applications for M5 Hex Slotted Castle Nut (Type 2) — GB/T 6180 / ISO 7036 (Series 050)
M5 Hex Slotted Castle Nut (Type 2) — GB/T 6180 / ISO 7036 (Series 050) are commonly specified for paired with the same-size screws on PCB hardware, light enclosures and small-scale assemblies.
Mating Parts for M5
Pair M5 with the matching M5 bolt or screw, plus a M5 flat washer where required to distribute load on softer materials.
When to Step Up or Down from M5
When the joint preload approaches the proof load of M5 class 8.8, step up to M6 class 8.8 (or move to M5 class 10.9). When the joint is over-specified, M4 often saves weight and cost without losing the safety margin.