The M5 size of Thread Cutting Screws (Type F) is dimensioned by DIN 7516. The table below gives the dimensional row from the standard, followed by the drive and the installation notes for this type.
Values are taken from the governing standard rather than from a general machine-thread table, because this type is not selected on one.
M5 Dimensional Row (DIN 7516)
| Thread size | Pitch (mm) | Head diameter dk (mm) | Head height k (mm) | Core hole in steel (mm) | Max material thickness (mm) | Common length range (mm) | Reference standard |
|---|---|---|---|---|---|---|---|
| M5 | 0.8 | 9.5 | 3.7 | 4.50 | 5 | 8~40 | DIN 7516 |
Spanner & Drive for M5 Thread Cutting Screws (Type F)
Drive geometry for M5 Thread Cutting Screws (Type F) is given by the row above; match the tool to the listed values.
Installation Tips for M5 Thread Cutting Screws (Type F)
- At M5 the joint is sensitive to over-torque — use a torque-limiting driver and check the head doesn't bury into a softer counterpart.
Mating Parts for M5
For M5, pair with a M5 hex nut (ISO 4032 / DIN 934) and, where used, a M5 flat washer (ISO 7089 / DIN 125A) under the head and under the nut.
Custom manufacturing · Made to drawing
Need thread cutting screws (type f) in a size this table does not list?
This page covers M5 thread cutting screws (type f). A non-standard screw is quoted from the drawing; where one already exists in the catalog, the special is usually a variation on its tooling. Made by cold heading or warm forging.
Minimum order from 2,000 pieces; samples within 7 days of drawing approval.
