Skip to content
info@engineeringhardware.com
Request a Quote

Washers · ISO 7980 / DIN 127

M6 Spring Lock Washers

A spring lock washer in M6: this guide pulls the row from the standard, adds the assembly numbers an engineer actually uses, and links you straight to a quote.

M6 Dimensional Row (ISO 7980 / DIN 127)

For bolt sizeInner diameter d1 min (mm)Outer diameter d2 max (mm)Width b (mm)Thickness s (mm)Reference standard
M66.111.84.01.6ISO 7980 / DIN 127

Spanner & Drive for M6 Spring Lock Washers

Drive geometry for M6 Spring Lock Washers is given by the row above; match the tool to the listed values.

Common Applications for M6 Spring Lock Washers

M6 Spring Lock Washers are commonly specified for general-purpose load-spreading and locking under machine bolts.

Mating Parts for M6

A M6 flat washer pairs with a M6 bolt/screw and matching M6 nut.

When to Step Up or Down from M6

When the joint preload approaches the proof load of M6 class 8.8, step up to M8 class 8.8 (or move to M6 class 10.9). When the joint is over-specified, M5 often saves weight and cost without losing the safety margin.

Technical Drawing

Customize the parameters below — every spec field is editable, and the drawing redraws to match the values you choose. Changing the size will snap the other fields to that size's standard values; you can then override any individual value.

Sends the selected values to the quote form below.

Request a Quote

Adjust the parameters in the drawing above and click "Request this configuration" to send the exact specification straight to this form.

Request a Quotation

Specification
Business Information

Dimensions & Specifications (ISO 7980 / DIN 127)

For bolt sizeInner diameter d1 min (mm)Outer diameter d2 max (mm)Width b (mm)Thickness s (mm)Reference standard
M22.14.41.60.5ISO 7980 / DIN 127
M2.52.65.12.00.6ISO 7980 / DIN 127
M33.16.22.00.8ISO 7980 / DIN 127
M3.53.67.02.50.8ISO 7980 / DIN 127
M44.17.62.51.0ISO 7980 / DIN 127
M55.19.23.01.2ISO 7980 / DIN 127
M66.111.84.01.6ISO 7980 / DIN 127
M77.113.14.01.6ISO 7980 / DIN 127
M88.114.85.02.0ISO 7980 / DIN 127
M1010.218.16.02.2ISO 7980 / DIN 127
M1212.221.17.02.5ISO 7980 / DIN 127
M1414.224.18.03.0ISO 7980 / DIN 127
M1616.227.49.03.5ISO 7980 / DIN 127
M1818.229.49.03.5ISO 7980 / DIN 127
M2020.233.610.04.0ISO 7980 / DIN 127
M2222.535.911.04.0ISO 7980 / DIN 127
M2424.540.112.05.0ISO 7980 / DIN 127
M2727.544.812.05.0ISO 7980 / DIN 127
M3030.550.014.06.0ISO 7980 / DIN 127
M3636.560.016.07.0ISO 7980 / DIN 127

Frequently Asked Questions

Which washer dimensions matter most for M6?

For a flat washer, the outside diameter (the bearing surface) and the thickness control how the load is spread under the head and how much elastic preload is preserved. The inside diameter must clear the bolt body but not be so large that the head bears mostly on the washer's outer rim.

What is the coarse-thread pitch of M6 for Spring Lock Washers?

For M6 the standard coarse pitch is 1 mm — this is the value used for Spring Lock Washers.

What clearance and tapping drill suit M6?

Use a 6.6 mm clearance hole (ISO 273 medium) for through-fixing, or a 5 mm tapping drill for a coarse M6 thread.

How do I request a quotation?

Use the technical drawing on this page to pick the exact configuration, then submit it with the quote form. We respond within one business day.