M8 Spring Lock Washer — GB/T 5782 / ISO 4014 (Series 003) is the m8-thread variant of Spring Lock Washer — GB/T 5782 / ISO 4014 (Series 003) manufactured to GB/T 5782 / ISO 4014. This page focuses on the data engineers reach for at the bench: dimensional values for the M8 size, the spanner/drive that fits, and the assembly data you need to install it.
M8 Dimensional Row (GB/T 5782 / ISO 4014)
| For bolt size | Inner diameter d1 (mm) | Outer diameter d2 (mm) | Width b (mm) | Thickness t (mm) | Reference standard |
|---|---|---|---|---|---|
| M8 | 8.1 | 14.8 | 2.5 | 2.0 | GB/T 93 / DIN 127B |
Spanner & Drive for M8 Spring Lock Washer — GB/T 5782 / ISO 4014 (Series 003)
Drive geometry for M8 Spring Lock Washer — GB/T 5782 / ISO 4014 (Series 003) is given by the row above; match the tool to the listed values.
Common Applications for M8 Spring Lock Washer — GB/T 5782 / ISO 4014 (Series 003)
M8 Spring Lock Washer — GB/T 5782 / ISO 4014 (Series 003) are commonly specified for general-purpose load-spreading and locking under machine bolts.
Mating Parts for M8
A M8 flat washer pairs with a M8 bolt/screw and matching M8 nut.
When to Step Up or Down from M8
When the joint preload approaches the proof load of M8 class 8.8, step up to M10 class 8.8 (or move to M8 class 10.9). When the joint is over-specified, M6 often saves weight and cost without losing the safety margin.