DIN 2353 is the international standard for hydraulic compression fittings. This page sets out what the standard governs, the size range it specifies, and the related standards you will see referenced in datasheets.
DIN 2353 — Scope
DIN 2353 specifies the dimensions and tolerances of hydraulic compression fittings. Material, property class, surface finish and packaging are governed by separate documents in the same standards family (for example ISO 898-1 for the mechanical property classes of bolts and screws).
Tolerance & Product Grades
DIN 2353, alongside the related DIN 2353 entries on this site, specifies product grades (typically A or B for fine work and C for general engineering) and tolerance classes for the controlling dimensions. Choose the grade against the precision your application requires.
Dimensions Specified by DIN 2353
| Tube OD (mm) | Nut length L (mm) | Nut width across flats (mm) | Tube bore (mm) | Max working pressure (bar) | Mating thread | Reference standard | Notes |
|---|---|---|---|---|---|---|---|
| 4 | 22 | 13 | 8 | 400 | M10x1 | DIN 2353 / ISO 8434-1 | Compression hydraulic fitting |
| 5 | 24 | 14 | 9 | 400 | M12x1.5 | DIN 2353 / ISO 8434-1 | Compression hydraulic fitting |
| 6 | 27 | 17 | 11 | 400 | M14x1.5 | DIN 2353 / ISO 8434-1 | Compression hydraulic fitting |
| 8 | 30 | 19 | 13 | 400 | M16x1.5 | DIN 2353 / ISO 8434-1 | Compression hydraulic fitting |
| 10 | 33 | 22 | 16 | 400 | M18x1.5 | DIN 2353 / ISO 8434-1 | Compression hydraulic fitting |
| 12 | 36 | 24 | 18 | 315 | M22x1.5 | DIN 2353 / ISO 8434-1 | Compression hydraulic fitting |
| 14 | 39 | 27 | 20 | 315 | M26x1.5 | DIN 2353 / ISO 8434-1 | Compression hydraulic fitting |
| 15 | 39 | 27 | 20 | 315 | M26x1.5 | DIN 2353 / ISO 8434-1 | Compression hydraulic fitting |
| 16 | 42 | 30 | 22 | 315 | M26x1.5 | DIN 2353 / ISO 8434-1 | Compression hydraulic fitting |
| 18 | 45 | 32 | 25 | 250 | M30x2 | DIN 2353 / ISO 8434-1 | Compression hydraulic fitting |
| 20 | 48 | 36 | 27 | 250 | M30x2 | DIN 2353 / ISO 8434-1 | Compression hydraulic fitting |
| 22 | 51 | 38 | 30 | 250 | M36x2 | DIN 2353 / ISO 8434-1 | Compression hydraulic fitting |
| 25 | 55 | 41 | 32 | 250 | M36x2 | DIN 2353 / ISO 8434-1 | Compression hydraulic fitting |
| 28 | 58 | 46 | 36 | 160 | M42x2 | DIN 2353 / ISO 8434-1 | Compression hydraulic fitting |
| 30 | 60 | 48 | 38 | 160 | M42x2 | DIN 2353 / ISO 8434-1 | Compression hydraulic fitting |
| 35 | 66 | 55 | 44 | 160 | M52x2 | DIN 2353 / ISO 8434-1 | Compression hydraulic fitting |
| 38 | 69 | 58 | 47 | 160 | M52x2 | DIN 2353 / ISO 8434-1 | Compression hydraulic fitting |
| 42 | 74 | 65 | 52 | 100 | M60x2 | DIN 2353 / ISO 8434-1 | Compression hydraulic fitting |
Companion Standards
DIN 2353 controls only the geometry of hydraulic compression fittings. The mechanical strength is set by ISO 898-1 (bolts and screws) or ISO 898-2 (nuts); the surface finish is governed by separate finish standards (e.g. ISO 4042 for electroplating). For corrosion testing, the relevant document is ISO 9227 (neutral salt spray).
When to Specify DIN 2353
DIN 2353 is still widely used in European mechanical engineering and as a cross-reference on legacy drawings; its ISO equivalent is preferred for new designs.