For Hydraulic Compression Fittings in A2 Stainless Steel, the controlling decisions are corrosion, strength and service temperature. This guide summarizes those three for A2 Stainless Steel Hydraulic Compression Fittings and lists every size we supply.
Why Choose A2 Stainless Steel for Hydraulic Compression Fittings
The most common stainless grade for indoor and general outdoor fasteners. For hydraulic compression fittings, this matters when good general corrosion resistance is the primary requirement.
Mechanical & Physical Properties
| Grade designation | A2-70 (304) |
|---|---|
| Magnetic response | Largely non-magnetic |
| Service temperature | approx. -200 °C to +400 °C |
| Corrosion characteristic | Good general corrosion resistance |
Corrosion Behavior in Service
A2 (304) gives excellent atmospheric and most-water corrosion resistance and is the most common stainless for Hydraulic Compression Fittings in indoor and general outdoor service. In chloride-bearing environments (marine air, road salt, swimming pools) consider stepping up to A4 (316).
Comparable Grades
For Hydraulic Compression Fittings, the alternative stainless grade is A4 (316). A2 (304) suits general indoor and outdoor service; A4 (316) adds molybdenum for marine and chloride environments. Where higher strength matters more than corrosion, switch to plated alloy-steel class 8.8 or 10.9.
Sizes of Hydraulic Compression Fittings Available in A2 Stainless Steel
| Tube OD (mm) | Nut length L (mm) | Nut width across flats (mm) | Tube bore (mm) | Max working pressure (bar) | Mating thread | Reference standard | Notes |
|---|---|---|---|---|---|---|---|
| 4 | 22 | 13 | 8 | 400 | M10x1 | DIN 2353 / ISO 8434-1 | Compression hydraulic fitting |
| 5 | 24 | 14 | 9 | 400 | M12x1.5 | DIN 2353 / ISO 8434-1 | Compression hydraulic fitting |
| 6 | 27 | 17 | 11 | 400 | M14x1.5 | DIN 2353 / ISO 8434-1 | Compression hydraulic fitting |
| 8 | 30 | 19 | 13 | 400 | M16x1.5 | DIN 2353 / ISO 8434-1 | Compression hydraulic fitting |
| 10 | 33 | 22 | 16 | 400 | M18x1.5 | DIN 2353 / ISO 8434-1 | Compression hydraulic fitting |
| 12 | 36 | 24 | 18 | 315 | M22x1.5 | DIN 2353 / ISO 8434-1 | Compression hydraulic fitting |
| 14 | 39 | 27 | 20 | 315 | M26x1.5 | DIN 2353 / ISO 8434-1 | Compression hydraulic fitting |
| 15 | 39 | 27 | 20 | 315 | M26x1.5 | DIN 2353 / ISO 8434-1 | Compression hydraulic fitting |
| 16 | 42 | 30 | 22 | 315 | M26x1.5 | DIN 2353 / ISO 8434-1 | Compression hydraulic fitting |
| 18 | 45 | 32 | 25 | 250 | M30x2 | DIN 2353 / ISO 8434-1 | Compression hydraulic fitting |
| 20 | 48 | 36 | 27 | 250 | M30x2 | DIN 2353 / ISO 8434-1 | Compression hydraulic fitting |
| 22 | 51 | 38 | 30 | 250 | M36x2 | DIN 2353 / ISO 8434-1 | Compression hydraulic fitting |
| 25 | 55 | 41 | 32 | 250 | M36x2 | DIN 2353 / ISO 8434-1 | Compression hydraulic fitting |
| 28 | 58 | 46 | 36 | 160 | M42x2 | DIN 2353 / ISO 8434-1 | Compression hydraulic fitting |
| 30 | 60 | 48 | 38 | 160 | M42x2 | DIN 2353 / ISO 8434-1 | Compression hydraulic fitting |
| 35 | 66 | 55 | 44 | 160 | M52x2 | DIN 2353 / ISO 8434-1 | Compression hydraulic fitting |
| 38 | 69 | 58 | 47 | 160 | M52x2 | DIN 2353 / ISO 8434-1 | Compression hydraulic fitting |
| 42 | 74 | 65 | 52 | 100 | M60x2 | DIN 2353 / ISO 8434-1 | Compression hydraulic fitting |