Specification summary of DIN 912 as applied to socket head cap screws: the dimensions the standard controls, the full specified size range, and the equivalent DIN/ISO/ASME designations.
DIN 912 — Scope
DIN 912 is "Hexagon socket head cap screws". Dimensionally aligned with ISO 4762.
Material, property class, surface finish and packaging are governed by separate documents — ISO 898-1 and ISO 898-2 for mechanical property classes, ISO 4042 for electroplated finishes.
Tolerance & Product Grades
DIN 912 does not divide socket head cap screws into product grades. Tolerances are given as limits on the individual dimensions in the table.
Where a general-tolerance class is cited on the drawing instead, it applies to the dimensions not otherwise toleranced.
Dimensions Specified by DIN 912
| Size | Pitch (mm) | Head diameter dk (mm) | Head height k (mm) | Hex key s (mm) | Socket depth t min (mm) | Reference standard |
|---|---|---|---|---|---|---|
| M1 | 0.25 | 1.9 | 1.0 | 0.7 | 0.5 | Below the ISO 4762 range (M1.6-M64); manufacturer series |
| M1.2 | 0.25 | 2.3 | 1.2 | 0.9 | 0.6 | Below the ISO 4762 range (M1.6-M64); manufacturer series |
| M1.4 | 0.3 | 2.6 | 1.4 | 1.0 | 0.7 | Below the ISO 4762 range (M1.6-M64); manufacturer series |
| M1.6 | 0.35 | 3.0 | 1.6 | 1.5 | 0.7 | ISO 4762 / DIN 912 |
| M2 | 0.4 | 3.8 | 2.0 | 1.5 | 1.0 | ISO 4762 / DIN 912 |
| M2.5 | 0.45 | 4.5 | 2.5 | 2.0 | 1.1 | ISO 4762 / DIN 912 |
| M3 | 0.5 | 5.5 | 3.0 | 2.5 | 1.3 | ISO 4762 / DIN 912 |
| M4 | 0.7 | 7.0 | 4.0 | 3.0 | 2.0 | ISO 4762 / DIN 912 |
| M5 | 0.8 | 8.5 | 5.0 | 4.0 | 2.5 | ISO 4762 / DIN 912 |
| M6 | 1.0 | 10.0 | 6.0 | 5.0 | 3.0 | ISO 4762 / DIN 912 |
| M8 | 1.25 | 13.0 | 8.0 | 6.0 | 4.0 | ISO 4762 / DIN 912 |
| M10 | 1.5 | 16.0 | 10.0 | 8.0 | 5.0 | ISO 4762 / DIN 912 |
| M12 | 1.75 | 18.0 | 12.0 | 10.0 | 6.0 | ISO 4762 / DIN 912 |
| M14 | 2.0 | 21.0 | 14.0 | 12.0 | 7.0 | ISO 4762 / DIN 912 |
| M16 | 2.0 | 24.0 | 16.0 | 14.0 | 8.0 | ISO 4762 / DIN 912 |
| M18 | 2.5 | 27.0 | 18.0 | 14.0 | 9.0 | ISO 4762 / DIN 912 |
| M20 | 2.5 | 30.0 | 20.0 | 17.0 | 10.0 | ISO 4762 / DIN 912 |
| M22 | 2.5 | 33.0 | 22.0 | 17.0 | 11.0 | ISO 4762 / DIN 912 |
| M24 | 3.0 | 36.0 | 24.0 | 19.0 | 12.0 | ISO 4762 / DIN 912 |
| M27 | 3.0 | 40.0 | 27.0 | 19.0 | 13.5 | ISO 4762 / DIN 912 |
| M30 | 3.5 | 45.0 | 30.0 | 22.0 | 15.5 | ISO 4762 / DIN 912 |
| M33 | 3.5 | 50.0 | 33.0 | 24.0 | 17.5 | ISO 4762 / DIN 912 |
| M36 | 4.0 | 54.0 | 36.0 | 27.0 | 19.0 | ISO 4762 / DIN 912 |
| M42 | 4.5 | 63.0 | 42.0 | 32.0 | 21.0 | ISO 4762 / DIN 912 |
| M48 | 5.0 | 72.0 | 48.0 | 36.0 | 25.0 | ISO 4762 / DIN 912 |
Equivalent Standards
Where direct equivalents exist (ISO ↔ DIN, ISO ↔ ASME), they are listed on the parent Socket Head Cap Screws page.
Always confirm against the dimensions on this page, since some "equivalent" standards differ in tolerances and head geometry.
When to Specify DIN 912
DIN 912 is still widely used in European mechanical engineering and as a cross-reference on legacy drawings; its ISO equivalent is preferred for new designs.
Custom manufacturing · Made to drawing
Need a screw to this standard in a non-standard size?
Parts built to DIN 912 are already in the catalog, so a special is usually a variation on existing tooling rather than a new design — which is what keeps the cost down. Made by cold heading or warm forging.
Minimum order from 2,000 pieces; samples within 7 days of drawing approval.
