GB/T 5267.1 is the standard cited for cross flat-head knurled self-tapping screws. This page sets out what the standard controls for this part, reproduces the dimensional table supplied against it, and notes the related designations referenced on drawings.
GB/T 5267.1 — Scope
GB/T 5267.1 is "Fasteners — Electroplated coating systems". GB/T 5267 1 is the Chinese national adoption of the same document. A finish specification, including hydrogen embrittlement relief. It controls no product dimensions.
This document is not a dimensional standard. The table on this page comes from the catalogue entry for the part, not from it.
Tolerance & Product Grades
Product grade is a concept from dimensional fastener standards and does not apply to GB/T 5267.1. Tolerances for this part are the limits shown against each dimension in the table.
Dimensions Specified by GB/T 5267.1
| Head form | Under-head feature | Material | Finish options | Substrate |
|---|---|---|---|---|
| cross-recess flat head | under-head knurling | carbon steel | zinc plating | wood |
| cross-recess flat head | under-head knurling | carbon steel | colour zinc plating | plastic |
| cross-recess flat head | under-head knurling | carbon steel | black oxide | thin plate |
Companion Standards
A complete specification for cross flat-head knurled self-tapping screws normally cites several documents: one for the geometry, one for the material or mechanical properties, and one for the finish. GB/T 5267.1 is one of them, not all of them.
When to Specify GB/T 5267.1
Choose GB/T 5267.1 for international engineering work and OEM supply where ISO standards are the contractual reference. It is the default modern specification for cross flat-head knurled self-tapping screws.
Custom manufacturing · Made to drawing
Need a screw to this standard in a non-standard size?
Parts built to GB T 5267 1 are already in the catalog, so a special is usually a variation on existing tooling rather than a new design — which is what keeps the cost down. Made by cold heading or warm forging.
Minimum order from 2,000 pieces; samples within 7 days of drawing approval.







