Push-In Pneumatic Fittings manufactured to Industry standard follow a specific scope. This page summarizes that scope, lists every dimension the standard fixes, and points to the most common cross-references.
Industry standard — Scope
Industry standard specifies the dimensions and tolerances of push-in pneumatic fittings. Material, property class, surface finish and packaging are governed by separate documents in the same standards family (for example ISO 898-1 for the mechanical property classes of bolts and screws).
Tolerance & Product Grades
Industry standard, alongside the related Industry standard entries on this site, specifies product grades (typically A or B for fine work and C for general engineering) and tolerance classes for the controlling dimensions. Choose the grade against the precision your application requires.
Dimensions Specified by Industry standard
| Tube OD (mm) | Thread size | Flow ref (Nl/min) | Max pressure (bar) | Pull-out force (N) | Reference standard | Notes |
|---|---|---|---|---|---|---|
| 4 | M5x0.8 | 80 | 10 | 70 | ISO 6150 | Push-in pneumatic fitting for PA/PU tubing |
| 4 | 1/8 BSP | 80 | 10 | 70 | ISO 6150 | Push-in pneumatic fitting for PA/PU tubing |
| 6 | M5x0.8 | 200 | 10 | 120 | ISO 6150 | Push-in pneumatic fitting for PA/PU tubing |
| 6 | 1/8 BSP | 200 | 10 | 120 | ISO 6150 | Push-in pneumatic fitting for PA/PU tubing |
| 6 | 1/4 BSP | 200 | 10 | 120 | ISO 6150 | Push-in pneumatic fitting for PA/PU tubing |
| 8 | 1/4 BSP | 350 | 10 | 180 | ISO 6150 | Push-in pneumatic fitting for PA/PU tubing |
| 8 | 3/8 BSP | 350 | 10 | 180 | ISO 6150 | Push-in pneumatic fitting for PA/PU tubing |
| 10 | 1/4 BSP | 500 | 10 | 250 | ISO 6150 | Push-in pneumatic fitting for PA/PU tubing |
| 10 | 3/8 BSP | 500 | 10 | 250 | ISO 6150 | Push-in pneumatic fitting for PA/PU tubing |
| 10 | 1/2 BSP | 500 | 10 | 250 | ISO 6150 | Push-in pneumatic fitting for PA/PU tubing |
| 12 | 3/8 BSP | 700 | 10 | 350 | ISO 6150 | Push-in pneumatic fitting for PA/PU tubing |
| 12 | 1/2 BSP | 700 | 10 | 350 | ISO 6150 | Push-in pneumatic fitting for PA/PU tubing |
| 16 | 1/2 BSP | 1200 | 10 | 500 | ISO 6150 | Push-in pneumatic fitting for PA/PU tubing |
| 16 | 3/4 BSP | 1200 | 10 | 500 | ISO 6150 | Push-in pneumatic fitting for PA/PU tubing |
Equivalent Standards
Where direct equivalents exist (ISO ↔ DIN, ISO ↔ ASME), they are listed on the parent Push-In Pneumatic Fittings page. Always confirm against the dimensions on this page, since some "equivalent" standards differ in tolerances and head geometry.
Companion Standards
Industry standard controls only the geometry of push-in pneumatic fittings. The mechanical strength is set by ISO 898-1 (bolts and screws) or ISO 898-2 (nuts); the surface finish is governed by separate finish standards (e.g. ISO 4042 for electroplating). For corrosion testing, the relevant document is ISO 9227 (neutral salt spray).