Specification summary of ISO 1234 as applied to split cotter pins: the dimensions the standard controls, the tolerance and product grades it defines, the full specified size range, and the equivalent DIN/ISO/ASME designations.
ISO 1234 — Scope
ISO 1234 specifies the dimensions and tolerances of split cotter pins. Material, property class, surface finish and packaging are governed by separate documents in the same standards family (for example ISO 898-1 for the mechanical property classes of bolts and screws).
Tolerance & Product Grades
ISO 1234, alongside the related ISO 1234 / DIN 94 entries on this site, specifies product grades (typically A or B for fine work and C for general engineering) and tolerance classes for the controlling dimensions. Choose the grade against the precision your application requires.
Dimensions Specified by ISO 1234
| Nominal diameter (mm) | Hole dia min (mm) | Hole dia max (mm) | Common length range (mm) | Material | Reference standard |
|---|---|---|---|---|---|
| 0.6 | 0.7 | 0.9 | 6~16 | Low-carbon steel / stainless | ISO 1234 / DIN 94 |
| 0.8 | 0.9 | 1.1 | 6~20 | Low-carbon steel / stainless | ISO 1234 / DIN 94 |
| 1.0 | 1.1 | 1.3 | 8~25 | Low-carbon steel / stainless | ISO 1234 / DIN 94 |
| 1.2 | 1.3 | 1.5 | 8~30 | Low-carbon steel / stainless | ISO 1234 / DIN 94 |
| 1.6 | 1.7 | 1.9 | 10~40 | Low-carbon steel / stainless | ISO 1234 / DIN 94 |
| 2.0 | 2.1 | 2.4 | 12~50 | Low-carbon steel / stainless | ISO 1234 / DIN 94 |
| 2.5 | 2.7 | 3.0 | 14~63 | Low-carbon steel / stainless | ISO 1234 / DIN 94 |
| 3.2 | 3.4 | 3.8 | 18~80 | Low-carbon steel / stainless | ISO 1234 / DIN 94 |
| 4.0 | 4.3 | 4.8 | 22~100 | Low-carbon steel / stainless | ISO 1234 / DIN 94 |
| 5.0 | 5.4 | 5.9 | 25~125 | Low-carbon steel / stainless | ISO 1234 / DIN 94 |
| 6.3 | 6.7 | 7.4 | 32~160 | Low-carbon steel / stainless | ISO 1234 / DIN 94 |
| 8.0 | 8.5 | 9.3 | 40~200 | Low-carbon steel / stainless | ISO 1234 / DIN 94 |
| 10.0 | 10.6 | 11.5 | 50~250 | Low-carbon steel / stainless | ISO 1234 / DIN 94 |
| 13.0 | 13.8 | 14.9 | 63~315 | Low-carbon steel / stainless | ISO 1234 / DIN 94 |
Equivalent Standards
Where direct equivalents exist (ISO ↔ DIN, ISO ↔ ASME), they are listed on the parent Split Cotter Pins page. Always confirm against the dimensions on this page, since some "equivalent" standards differ in tolerances and head geometry.
When to Specify ISO 1234
Choose ISO 1234 for international engineering work and OEM supply where ISO standards are the contractual reference. It is the default modern specification for split cotter pins.