Needle Roller Bearing manufactured to ISO are dimensioned by the size table reproduced on this page. The standard fixes geometry and tolerances only; material and property class are assigned by ISO 898-1/898-2, and surface finish by separate finish standards.
ISO — Scope
ISO specifies the dimensions and tolerances of needle roller bearing — iso / din (series 133). Material, property class, surface finish and packaging are governed by separate documents in the same standards family (for example ISO 898-1 for the mechanical property classes of bolts and screws).
Tolerance & Product Grades
ISO, alongside the related ISO / DIN entries on this site, specifies product grades (typically A or B for fine work and C for general engineering) and tolerance classes for the controlling dimensions. Choose the grade against the precision your application requires.
Dimensions Specified by ISO
| Bore d (mm) | Outer diameter D (mm) | Width B (mm) | Dynamic load C (kN) | Reference standard |
|---|---|---|---|---|
| 8 | 15 | 12 | 7.2 | ISO 1206 / GB/T 309 |
| 10 | 17 | 12 | 8.3 | ISO 1206 / GB/T 309 |
| 12 | 19 | 12 | 9.65 | ISO 1206 / GB/T 309 |
| 15 | 23 | 12 | 12.5 | ISO 1206 / GB/T 309 |
| 20 | 28 | 16 | 18.7 | ISO 1206 / GB/T 309 |
| 25 | 33 | 16 | 22.8 | ISO 1206 / GB/T 309 |
| 30 | 40 | 20 | 33.0 | ISO 1206 / GB/T 309 |
| 40 | 50 | 20 | 42.5 | ISO 1206 / GB/T 309 |
Equivalent Standards
Where direct equivalents exist (ISO ↔ DIN, ISO ↔ ASME), they are listed on the parent Needle Roller Bearing — ISO / DIN (Series 133) page. Always confirm against the dimensions on this page, since some "equivalent" standards differ in tolerances and head geometry.
When to Specify ISO
Choose ISO for international engineering work and OEM supply where ISO standards are the contractual reference. It is the default modern specification for needle roller bearing — iso / din (series 133).