Skip to content
info@engineeringhardware.com
WhatsApp
Request a Quote
Rivets · Trade series (turn-button fastener eyelets) · Application guide

What Are Turn-Button Fastener Eyelets Used For?

Typical applications, the industries that specify turn-button fastener eyelets, and how to choose the right size, material and finish for the joint.

Turn-Button Fastener Eyelets are used for setting the fabric-side eyelet that engages a matching turn-button base. They are manufactured to Trade series (turn-button fastener eyelets), and selection is driven by the screw size, the fit and tolerance the assembly requires, and the service environment.

Primary duty
Setting the fabric-side eyelet that engages a matching turn-button base
Governing standard
Trade series (turn-button fastener eyelets)
Screw size range
1-1/16 to 1-1/16
Category
Rivets

Application notes are general engineering guidance. Verify the property class and any approval requirement against your own design calculation.

What Are Turn-Button Fastener Eyelets Used For? application image

Turn-Button Fastener Eyelets are used primarily for setting the fabric-side eyelet that engages a matching turn-button base. This page lists the industries and assemblies where they are specified, the selection criteria that matter for each application, installation practice, and the cases where a different fastener type is the correct choice. Parts are supplied to Trade series (turn-button fastener eyelets). Stocked across roughly 1 to 1, they cover light-duty and instrument-scale work.

Typical Applications for Turn-Button Fastener Eyelets

The most common settings where these are specified:

  • Canvas fabrication: Eyelets provide the fabric-side half of a turn-button connection.
  • Boat covers: Nickel-plated brass supports removable fabric-to-solid-surface attachment.
  • Vehicle trim: Two height options accommodate the mating base and material stack.
  • Upholstery: The eyelet engages a base without adding a threaded nut to the fabric.

How to Specify Turn-Button Fastener Eyelets for Your Application

  • Size: Select on screw size, and confirm it against the mating feature in the assembly. This product spans 1–1; check the full table below for the exact dimensions of each size.
  • Material: Choose the material and finish for the service environment — plated steel for general use, stainless for corrosion resistance.
  • Environment: For damp, coastal or chemical exposure prefer A4/316 stainless or a suitable coating; indoors, plated steel or A2 is usually sufficient.
  • Standard: This product is supplied to Trade series (turn-button fastener eyelets). Quoting the standard on your order guarantees interchangeable dimensions between suppliers.

Installation & Assembly Practice

  • Drill the hole 0.1 mm over the nominal rivet diameter and deburr both sides before setting.
  • Grip range must match the total joint thickness — a rivet set outside its grip range clamps poorly and works loose.

Common Selection Mistakes with Turn-Button Fastener Eyelets

  • Setting a rivet outside its grip range, which leaves the joint loose from day one.
  • Using aluminum rivets on steel sheet outdoors — galvanic corrosion eats the rivet.

Where Turn-Button Fastener Eyelets Are Not the Right Choice

Not where the joint must later be disassembled, and not for high-tension structural connections.

Technical Drawing

Customize the parameters below — every spec field is editable, and the drawing redraws to match the values you choose. Changing the size will snap the other fields to that size's standard values; you can then override any individual value.

Sends the selected values to the quote form below.

Request a Quote

The form below follows the current technical drawing configuration. Change the drawing values above and the request details update automatically.

Request a Quotation

Specification
Business Information

Dimensions & Specifications (Trade series (turn-button fastener eyelets))

Eyelet diameter (in)Height options (in)MaterialMating partUse
1-1/1613/16nickel-plated brassturn-button basefabric-to-solid-surface attachment
1-1/1627/32nickel-plated brassturn-button basefabric-to-solid-surface attachment
Inside the plant

Manufactured in our own plant

This part is cold-formed, threaded, heat-treated and finished in-house. The stages below are where its class and finish are actually decided.

  1. Wire rod feeding into a cold heading machine
    01

    Cold heading

    Wire rod is drawn to size and cold-formed into blanks. Forming rather than cutting keeps the grain flow continuous around the head, which is where a bolt is most likely to fail.

    Head dimensions and under-head radius checked at set-up and per shift.

  2. Thread rolling machine producing bolt threads
    02

    Thread rolling

    Threads are rolled between hardened dies rather than cut. Rolled threads are stronger in fatigue than cut threads and hold pitch and flank angle far more consistently across a batch.

    Go / no-go ring gauges to ISO 965 tolerance class 6g.

  3. Baskets of bolts staged for heat treatment
    03

    Heat treatment

    Quench-and-temper brings carbon and alloy steel to the property class ordered — 8.8, 10.9 or 12.9 — with the furnace charge tracked so a finished lot can be traced back to it.

    Core hardness and tensile tested per lot to ISO 898-1.

  4. Zinc plated bolts in a treatment basket
    04

    Surface treatment

    Zinc, zinc-nickel, hot-dip galvanizing, black oxide, phosphate and Dacromet, selected against the service environment rather than against the price list.

    Coating thickness and neutral salt spray hours to ISO 9227.

Frequently Asked Questions

Which industries use Turn-Button Fastener Eyelets?

They are commonly specified in boat covers, vehicle trim and upholstery, among other sectors.

How do I choose the right size of Turn-Button Fastener Eyelets?

Select on screw size and on the fit the assembly requires. This product is available from 1 to 1; the full dimension table on this page lists each size.

Can Turn-Button Fastener Eyelets joints be taken apart?

No — rivets form a permanent joint and must be drilled out to remove. Use a bolt or screw where you need to disassemble the joint later.

What material should Turn-Button Fastener Eyelets be for outdoor use?

For damp, coastal or chemical environments specify A4 (316) stainless or a suitably coated steel. For indoor or dry use, A2 (304) stainless or zinc-plated steel is normally adequate.

Can I get a quote for Turn-Button Fastener Eyelets in the size and material I need?

Yes. Use the technical drawing and quote form on this page to set the size and options, then send the exact configuration to our team for pricing and lead time.