Skip to content
info@engineeringhardware.com
Request a Quote

Pins · ISO 8734 / DIN 6325

A2 Stainless Steel Dowel Pins

A2 Stainless Steel Dowel Pins reference image

A2 Stainless Steel Dowel Pins are stocked to ISO 8734 / DIN 6325. The grade provides good general corrosion resistance and is largely non-magnetic; the practical service range is approx. -200 °C to +400 °C. Property data, grade comparison and the full size table follow.

Why Choose A2 Stainless Steel for Dowel Pins

The most common stainless grade for indoor and general outdoor fasteners. For dowel pins, this matters when good general corrosion resistance is the primary requirement.

Mechanical & Physical Properties

Grade designationA2-70 (304)
Magnetic responseLargely non-magnetic
Service temperatureapprox. -200 °C to +400 °C
Corrosion characteristicGood general corrosion resistance

Corrosion Behavior in Service

A2 (304) gives excellent atmospheric and most-water corrosion resistance and is the most common stainless for Dowel Pins in indoor and general outdoor service. In chloride-bearing environments (marine air, road salt, swimming pools) consider stepping up to A4 (316).

Galvanic & Galling Considerations

Two important notes for stainless dowel pins: (1) stainless can gall on stainless threads under load — use a thread lubricant or anti-galling compound, especially for M6 and below; (2) when joined to aluminum or galvanized steel, stainless can drive galvanic corrosion of the less-noble metal in wet service — isolate with a coating or sleeve where appropriate.

Sizes of Dowel Pins Available in A2 Stainless Steel

Nominal diameter (mm)Diameter toleranceCommon length range (mm)MaterialHardnessReference standardNotes
1.0h64~10Alloy steelHardenedISO 8734 / DIN 6325Both ends chamfered, precision fit
1.2h64~12Alloy steelHardenedISO 8734 / DIN 6325Both ends chamfered, precision fit
1.5h64~16Alloy steelHardenedISO 8734 / DIN 6325Both ends chamfered, precision fit
2.0h66~20Alloy steelHardenedISO 8734 / DIN 6325Both ends chamfered, precision fit
2.5h66~24Alloy steelHardenedISO 8734 / DIN 6325Both ends chamfered, precision fit
3.0h68~30Alloy steelHardenedISO 8734 / DIN 6325Both ends chamfered, precision fit
4.0h68~40Alloy steelHardenedISO 8734 / DIN 6325Both ends chamfered, precision fit
5.0h610~50Alloy steelHardenedISO 8734 / DIN 6325Both ends chamfered, precision fit
6.0h612~60Alloy steelHardenedISO 8734 / DIN 6325Both ends chamfered, precision fit
8.0h616~80Alloy steelHardenedISO 8734 / DIN 6325Both ends chamfered, precision fit
10.0h620~100Alloy steelHardenedISO 8734 / DIN 6325Both ends chamfered, precision fit
12.0h625~120Alloy steelHardenedISO 8734 / DIN 6325Both ends chamfered, precision fit
16.0h630~160Alloy steelHardenedISO 8734 / DIN 6325Both ends chamfered, precision fit
20.0h635~200Alloy steelHardenedISO 8734 / DIN 6325Both ends chamfered, precision fit
25.0h645~200Alloy steelHardenedISO 8734 / DIN 6325Both ends chamfered, precision fit
30.0h650~200Alloy steelHardenedISO 8734 / DIN 6325Both ends chamfered, precision fit
40.0h660~200Alloy steelHardenedISO 8734 / DIN 6325Both ends chamfered, precision fit
50.0h680~200Alloy steelHardenedISO 8734 / DIN 6325Both ends chamfered, precision fit

Technical Drawing

Customize the parameters below — every spec field is editable, and the drawing redraws to match the values you choose. Changing the size will snap the other fields to that size's standard values; you can then override any individual value.

Sends the selected values to the quote form below.

Request a Quote

Adjust the parameters in the drawing above and click "Request this configuration" to send the exact specification straight to this form.

Request a Quotation

Specification
Business Information

Dimensions & Specifications (ISO 8734 / DIN 6325)

Nominal diameter (mm)Diameter toleranceCommon length range (mm)MaterialHardnessReference standardNotes
1.0h64~10Alloy steelHardenedISO 8734 / DIN 6325Both ends chamfered, precision fit
1.2h64~12Alloy steelHardenedISO 8734 / DIN 6325Both ends chamfered, precision fit
1.5h64~16Alloy steelHardenedISO 8734 / DIN 6325Both ends chamfered, precision fit
2.0h66~20Alloy steelHardenedISO 8734 / DIN 6325Both ends chamfered, precision fit
2.5h66~24Alloy steelHardenedISO 8734 / DIN 6325Both ends chamfered, precision fit
3.0h68~30Alloy steelHardenedISO 8734 / DIN 6325Both ends chamfered, precision fit
4.0h68~40Alloy steelHardenedISO 8734 / DIN 6325Both ends chamfered, precision fit
5.0h610~50Alloy steelHardenedISO 8734 / DIN 6325Both ends chamfered, precision fit
6.0h612~60Alloy steelHardenedISO 8734 / DIN 6325Both ends chamfered, precision fit
8.0h616~80Alloy steelHardenedISO 8734 / DIN 6325Both ends chamfered, precision fit
10.0h620~100Alloy steelHardenedISO 8734 / DIN 6325Both ends chamfered, precision fit
12.0h625~120Alloy steelHardenedISO 8734 / DIN 6325Both ends chamfered, precision fit
16.0h630~160Alloy steelHardenedISO 8734 / DIN 6325Both ends chamfered, precision fit
20.0h635~200Alloy steelHardenedISO 8734 / DIN 6325Both ends chamfered, precision fit
25.0h645~200Alloy steelHardenedISO 8734 / DIN 6325Both ends chamfered, precision fit
30.0h650~200Alloy steelHardenedISO 8734 / DIN 6325Both ends chamfered, precision fit
40.0h660~200Alloy steelHardenedISO 8734 / DIN 6325Both ends chamfered, precision fit
50.0h680~200Alloy steelHardenedISO 8734 / DIN 6325Both ends chamfered, precision fit

Frequently Asked Questions

What corrosion resistance do A2 Stainless Steel Dowel Pins offer?

A2 Stainless Steel Dowel Pins provide good general corrosion resistance with a service range of approx. -200 °C to +400 °C.

Should I choose A2 Stainless Steel or A4 (316) for Dowel Pins?

For Dowel Pins, A2 Stainless Steel suits general indoor and outdoor use; A4 (316) is preferred for marine, coastal and chemical environments. Choose by corrosion exposure first.

Can A2 Stainless Steel Dowel Pins gall during installation?

Yes — stainless on stainless is prone to thread galling under load, especially at smaller sizes. Use an anti-galling lubricant or wax thread compound, and slow the tightening rate where possible.

Is A2 Stainless Steel food-grade?

A2 (304) is widely accepted for food contact in non-chloride environments; A4 (316) is preferred where chlorides are present.

How do I request a quotation?

Use the technical drawing on this page to pick the exact configuration, then submit it with the quote form. We respond within one business day.