Skip to content
info@engineeringhardware.com
Request a Quote

Pins · ISO 8734 / DIN 6325

A4 Stainless Steel Dowel Pins

Specifying Dowel Pins in A4 Stainless Steel pairs the dimensional form of Dowel Pins (ISO 8734 / DIN 6325) with the engineering properties of A4 Stainless Steel. This page explains when to choose the grade, how it behaves in service, and which grades to compare it against.

Why Choose A4 Stainless Steel for Dowel Pins

Specified for marine, coastal and chemical applications. For dowel pins, this matters when superior, including marine and chloride environments is the primary requirement.

Mechanical & Physical Properties

Grade designationA4-80 (316)
Magnetic responseLargely non-magnetic
Service temperatureapprox. -200 °C to +400 °C
Corrosion characteristicSuperior, including marine and chloride environments

Corrosion Behavior in Service

A4 (316) adds 2–3% molybdenum to the A2 (304) composition, which dramatically improves resistance to chloride-pitting corrosion. For Dowel Pins in marine, coastal, swimming-pool or food-processing environments, A4 is the default selection.

Comparable Grades

For Dowel Pins, the alternative stainless grade is A2 (304). A2 (304) suits general indoor and outdoor service; A4 (316) adds molybdenum for marine and chloride environments. Where higher strength matters more than corrosion, switch to plated alloy-steel class 8.8 or 10.9.

Sizes of Dowel Pins Available in A4 Stainless Steel

Nominal diameter (mm)Diameter toleranceCommon length range (mm)MaterialHardnessReference standardNotes
1.0h64~10Alloy steelHardenedISO 8734 / DIN 6325Both ends chamfered, precision fit
1.2h64~12Alloy steelHardenedISO 8734 / DIN 6325Both ends chamfered, precision fit
1.5h64~16Alloy steelHardenedISO 8734 / DIN 6325Both ends chamfered, precision fit
2.0h66~20Alloy steelHardenedISO 8734 / DIN 6325Both ends chamfered, precision fit
2.5h66~24Alloy steelHardenedISO 8734 / DIN 6325Both ends chamfered, precision fit
3.0h68~30Alloy steelHardenedISO 8734 / DIN 6325Both ends chamfered, precision fit
4.0h68~40Alloy steelHardenedISO 8734 / DIN 6325Both ends chamfered, precision fit
5.0h610~50Alloy steelHardenedISO 8734 / DIN 6325Both ends chamfered, precision fit
6.0h612~60Alloy steelHardenedISO 8734 / DIN 6325Both ends chamfered, precision fit
8.0h616~80Alloy steelHardenedISO 8734 / DIN 6325Both ends chamfered, precision fit
10.0h620~100Alloy steelHardenedISO 8734 / DIN 6325Both ends chamfered, precision fit
12.0h625~120Alloy steelHardenedISO 8734 / DIN 6325Both ends chamfered, precision fit
16.0h630~160Alloy steelHardenedISO 8734 / DIN 6325Both ends chamfered, precision fit
20.0h635~200Alloy steelHardenedISO 8734 / DIN 6325Both ends chamfered, precision fit
25.0h645~200Alloy steelHardenedISO 8734 / DIN 6325Both ends chamfered, precision fit
30.0h650~200Alloy steelHardenedISO 8734 / DIN 6325Both ends chamfered, precision fit
40.0h660~200Alloy steelHardenedISO 8734 / DIN 6325Both ends chamfered, precision fit
50.0h680~200Alloy steelHardenedISO 8734 / DIN 6325Both ends chamfered, precision fit

Technical Drawing

Customize the parameters below — every spec field is editable, and the drawing redraws to match the values you choose. Changing the size will snap the other fields to that size's standard values; you can then override any individual value.

Sends the selected values to the quote form below.

Request a Quote

Adjust the parameters in the drawing above and click "Request this configuration" to send the exact specification straight to this form.

Request a Quotation

Specification
Business Information

Dimensions & Specifications (ISO 8734 / DIN 6325)

Nominal diameter (mm)Diameter toleranceCommon length range (mm)MaterialHardnessReference standardNotes
1.0h64~10Alloy steelHardenedISO 8734 / DIN 6325Both ends chamfered, precision fit
1.2h64~12Alloy steelHardenedISO 8734 / DIN 6325Both ends chamfered, precision fit
1.5h64~16Alloy steelHardenedISO 8734 / DIN 6325Both ends chamfered, precision fit
2.0h66~20Alloy steelHardenedISO 8734 / DIN 6325Both ends chamfered, precision fit
2.5h66~24Alloy steelHardenedISO 8734 / DIN 6325Both ends chamfered, precision fit
3.0h68~30Alloy steelHardenedISO 8734 / DIN 6325Both ends chamfered, precision fit
4.0h68~40Alloy steelHardenedISO 8734 / DIN 6325Both ends chamfered, precision fit
5.0h610~50Alloy steelHardenedISO 8734 / DIN 6325Both ends chamfered, precision fit
6.0h612~60Alloy steelHardenedISO 8734 / DIN 6325Both ends chamfered, precision fit
8.0h616~80Alloy steelHardenedISO 8734 / DIN 6325Both ends chamfered, precision fit
10.0h620~100Alloy steelHardenedISO 8734 / DIN 6325Both ends chamfered, precision fit
12.0h625~120Alloy steelHardenedISO 8734 / DIN 6325Both ends chamfered, precision fit
16.0h630~160Alloy steelHardenedISO 8734 / DIN 6325Both ends chamfered, precision fit
20.0h635~200Alloy steelHardenedISO 8734 / DIN 6325Both ends chamfered, precision fit
25.0h645~200Alloy steelHardenedISO 8734 / DIN 6325Both ends chamfered, precision fit
30.0h650~200Alloy steelHardenedISO 8734 / DIN 6325Both ends chamfered, precision fit
40.0h660~200Alloy steelHardenedISO 8734 / DIN 6325Both ends chamfered, precision fit
50.0h680~200Alloy steelHardenedISO 8734 / DIN 6325Both ends chamfered, precision fit

Frequently Asked Questions

Is A4 Stainless Steel food-grade?

A4 (316) is the standard food-contact stainless grade in most jurisdictions, particularly where chloride exposure (brines, dairy CIP) is present.

Can A4 Stainless Steel Dowel Pins be used with aluminum?

Yes, but stainless drives mild galvanic corrosion of aluminum in wet service — isolate with a coating, sleeve or paint, or accept the trade-off if the joint is dry and indoor.

What's the service temperature limit for A4 Stainless Steel?

The practical service range is approx. -200 °C to +400 °C.

Can A4 Stainless Steel replace plated alloy steel structurally?

Only at the standard strength classes — A2-70 / A4-80 are roughly equivalent to class 7 steel; A4-100 reaches class 8.8. For class 10.9 or 12.9 strength, plated alloy steel is required.

How do I request a quotation?

Use the technical drawing on this page to pick the exact configuration, then submit it with the quote form. We respond within one business day.