For Socket Set Screws in A2 Stainless Steel, the controlling decisions are corrosion, strength and service temperature. This guide summarizes those three for A2 Stainless Steel Socket Set Screws and lists every size we supply.
Why Choose A2 Stainless Steel for Socket Set Screws
The most common stainless grade for indoor and general outdoor fasteners. For socket set screws, this matters when good general corrosion resistance is the primary requirement.
Mechanical & Physical Properties
| Grade designation | A2-70 (304) |
|---|---|
| Magnetic response | Largely non-magnetic |
| Service temperature | approx. -200 °C to +400 °C |
| Corrosion characteristic | Good general corrosion resistance |
Corrosion Behavior in Service
A2 (304) gives excellent atmospheric and most-water corrosion resistance and is the most common stainless for Socket Set Screws in indoor and general outdoor service. In chloride-bearing environments (marine air, road salt, swimming pools) consider stepping up to A4 (316).
Comparable Grades
For Socket Set Screws, the alternative stainless grade is A4 (316). A2 (304) suits general indoor and outdoor service; A4 (316) adds molybdenum for marine and chloride environments. Where higher strength matters more than corrosion, switch to plated alloy-steel class 8.8 or 10.9.
Sizes of Socket Set Screws Available in A2 Stainless Steel
| Size | Pitch (mm) | Hex socket s (mm) | Engagement depth t min (mm) | Point diameter dp (mm) | End type | Reference standard |
|---|---|---|---|---|---|---|
| M1.6 | 0.35 | 0.7 | 0.7 | 0.8 | Flat point | ISO 4026 / DIN 913-916 |
| M1.6 | 0.35 | 0.7 | 0.7 | 0.8 | Cone point | ISO 4027 / DIN 913-916 |
| M1.6 | 0.35 | 0.7 | 0.7 | 0.8 | Dog point | ISO 4028 / DIN 913-916 |
| M1.6 | 0.35 | 0.7 | 0.7 | 0.8 | Cup point | ISO 4029 / DIN 913-916 |
| M2 | 0.4 | 0.9 | 0.9 | 1.0 | Flat point | ISO 4026 / DIN 913-916 |
| M2 | 0.4 | 0.9 | 0.9 | 1.0 | Cone point | ISO 4027 / DIN 913-916 |
| M2 | 0.4 | 0.9 | 0.9 | 1.0 | Dog point | ISO 4028 / DIN 913-916 |
| M2 | 0.4 | 0.9 | 0.9 | 1.0 | Cup point | ISO 4029 / DIN 913-916 |
| M2.5 | 0.45 | 1.3 | 1.1 | 1.5 | Flat point | ISO 4026 / DIN 913-916 |
| M2.5 | 0.45 | 1.3 | 1.1 | 1.5 | Cone point | ISO 4027 / DIN 913-916 |
| M2.5 | 0.45 | 1.3 | 1.1 | 1.5 | Dog point | ISO 4028 / DIN 913-916 |
| M2.5 | 0.45 | 1.3 | 1.1 | 1.5 | Cup point | ISO 4029 / DIN 913-916 |
| M3 | 0.5 | 1.5 | 1.4 | 2.0 | Flat point | ISO 4026 / DIN 913-916 |
| M3 | 0.5 | 1.5 | 1.4 | 2.0 | Cone point | ISO 4027 / DIN 913-916 |
| M3 | 0.5 | 1.5 | 1.4 | 2.0 | Dog point | ISO 4028 / DIN 913-916 |
| M3 | 0.5 | 1.5 | 1.4 | 2.0 | Cup point | ISO 4029 / DIN 913-916 |
| M4 | 0.7 | 2.0 | 2.0 | 2.5 | Flat point | ISO 4026 / DIN 913-916 |
| M4 | 0.7 | 2.0 | 2.0 | 2.5 | Cone point | ISO 4027 / DIN 913-916 |
| M4 | 0.7 | 2.0 | 2.0 | 2.5 | Dog point | ISO 4028 / DIN 913-916 |
| M4 | 0.7 | 2.0 | 2.0 | 2.5 | Cup point | ISO 4029 / DIN 913-916 |
| M5 | 0.8 | 2.5 | 2.5 | 3.5 | Flat point | ISO 4026 / DIN 913-916 |
| M5 | 0.8 | 2.5 | 2.5 | 3.5 | Cone point | ISO 4027 / DIN 913-916 |
| M5 | 0.8 | 2.5 | 2.5 | 3.5 | Dog point | ISO 4028 / DIN 913-916 |
| M5 | 0.8 | 2.5 | 2.5 | 3.5 | Cup point | ISO 4029 / DIN 913-916 |
| M6 | 1.0 | 3.0 | 3.0 | 4.0 | Flat point | ISO 4026 / DIN 913-916 |
| M6 | 1.0 | 3.0 | 3.0 | 4.0 | Cone point | ISO 4027 / DIN 913-916 |
| M6 | 1.0 | 3.0 | 3.0 | 4.0 | Dog point | ISO 4028 / DIN 913-916 |
| M6 | 1.0 | 3.0 | 3.0 | 4.0 | Cup point | ISO 4029 / DIN 913-916 |
| M8 | 1.25 | 4.0 | 4.0 | 5.5 | Flat point | ISO 4026 / DIN 913-916 |
| M8 | 1.25 | 4.0 | 4.0 | 5.5 | Cone point | ISO 4027 / DIN 913-916 |