Hex Nuts, Grade C manufactured in A4 Stainless Steel (A4-80 (316)) are dimensioned to ISO 4034. The sections below give the mechanical and physical properties of the grade, its behavior in corrosive and elevated-temperature service, and the full size table.
Why Choose A4 Stainless Steel for Hex Nuts, Grade C
Specified for marine, coastal and chemical applications. For hex nuts, grade c, this matters when superior, including marine and chloride environments is the primary requirement.
Mechanical & Physical Properties
| Grade designation | A4-80 (316) |
|---|---|
| Magnetic response | Largely non-magnetic |
| Service temperature | approx. -200 °C to +400 °C |
| Corrosion characteristic | Superior, including marine and chloride environments |
Corrosion Behavior in Service
A4 (316) adds 2–3% molybdenum to the A2 (304) composition, which dramatically improves resistance to chloride-pitting corrosion. For Hex Nuts, Grade C in marine, coastal, swimming-pool or food-processing environments, A4 is the default selection.
Comparable Grades
For Hex Nuts, Grade C, the alternative stainless grade is A2 (304). A2 (304) suits general indoor and outdoor service; A4 (316) adds molybdenum for marine and chloride environments. Where higher strength matters more than corrosion, switch to plated alloy-steel class 8.8 or 10.9.
Sizes of Hex Nuts, Grade C Available in A4 Stainless Steel
| Size | Pitch (mm) | Width across flats s (mm) | Width across corners e min (mm) | Nut height m (mm) | Product grade | Reference standard |
|---|---|---|---|---|---|---|
| M5 | 0.8 | 8.0 | 8.63 | 4.7 | Grade C | ISO 4034 / DIN 555 |
| M6 | 1.0 | 10.0 | 10.89 | 5.2 | Grade C | ISO 4034 / DIN 555 |
| M8 | 1.25 | 13.0 | 14.2 | 6.8 | Grade C | ISO 4034 / DIN 555 |
| M10 | 1.5 | 17.0 | 18.72 | 8.4 | Grade C | ISO 4034 / DIN 555 |
| M12 | 1.75 | 19.0 | 20.88 | 10.8 | Grade C | ISO 4034 / DIN 555 |
| M14 | 2.0 | 22.0 | 24.49 | 12.8 | Grade C | ISO 4034 / DIN 555 |
| M16 | 2.0 | 24.0 | 26.75 | 14.8 | Grade C | ISO 4034 / DIN 555 |
| M18 | 2.5 | 27.0 | 29.56 | 15.8 | Grade C | ISO 4034 / DIN 555 |
| M20 | 2.5 | 30.0 | 33.53 | 18.0 | Grade C | ISO 4034 / DIN 555 |
| M22 | 2.5 | 32.0 | 35.72 | 19.4 | Grade C | ISO 4034 / DIN 555 |
| M24 | 3.0 | 36.0 | 39.55 | 21.5 | Grade C | ISO 4034 / DIN 555 |
| M27 | 3.0 | 41.0 | 45.2 | 23.8 | Grade C | ISO 4034 / DIN 555 |
| M30 | 3.5 | 46.0 | 50.85 | 25.6 | Grade C | ISO 4034 / DIN 555 |
| M36 | 4.0 | 55.0 | 60.79 | 31.0 | Grade C | ISO 4034 / DIN 555 |
| M42 | 4.5 | 65.0 | 71.3 | 34.0 | Grade C | ISO 4034 / DIN 555 |
| M48 | 5.0 | 75.0 | 82.6 | 38.0 | Grade C | ISO 4034 / DIN 555 |