For Hex Bolts, Grade C in Grade 12.9 Steel, the controlling decisions are corrosion, strength and service temperature. This guide summarizes those three for Grade 12.9 Steel Hex Bolts, Grade C and lists every size we supply.
Why Choose Grade 12.9 Steel for Hex Bolts, Grade C
The highest common strength class, for high-load machine assembly. For hex bolts, grade c, this matters when requires plating or black-oxide protection is the primary requirement.
Mechanical & Physical Properties
| Grade designation | class 12.9 |
|---|---|
| Magnetic response | Magnetic |
| Service temperature | up to approx. +300 °C |
| Corrosion characteristic | Requires plating or black-oxide protection |
Corrosion Behavior in Service
Carbon and alloy steel hex bolts, grade c require a coating for corrosion protection. Zinc plating (with or without passivation) is the most common; hot-dip galvanizing is used for outdoor structural service; black-oxide is mainly a tarnish-prevention finish for tool-room use.
Comparable Grades
For Hex Bolts, Grade C, class 8.8 is the comparable strength step. Move up when the joint preload approaches the proof load of the current class; move down when the joint is over-specified. For corrosion-critical service, switch to stainless A2 or A4.
Sizes of Hex Bolts, Grade C Available in Grade 12.9 Steel
| Size | Pitch (mm) | Width across flats s (mm) | Width across corners e min (mm) | Head height k (mm) | Product grade | Reference standard |
|---|---|---|---|---|---|---|
| M5 | 0.8 | 8.0 | 8.63 | 3.35 | Grade C | ISO 4016 / DIN 601 |
| M6 | 1.0 | 10.0 | 10.89 | 4.15 | Grade C | ISO 4016 / DIN 601 |
| M8 | 1.25 | 13.0 | 14.2 | 5.45 | Grade C | ISO 4016 / DIN 601 |
| M10 | 1.5 | 17.0 | 18.72 | 6.58 | Grade C | ISO 4016 / DIN 601 |
| M12 | 1.75 | 19.0 | 20.88 | 7.68 | Grade C | ISO 4016 / DIN 601 |
| M14 | 2.0 | 22.0 | 24.49 | 9.25 | Grade C | ISO 4016 / DIN 601 |
| M16 | 2.0 | 24.0 | 26.75 | 10.18 | Grade C | ISO 4016 / DIN 601 |
| M18 | 2.5 | 27.0 | 29.56 | 11.72 | Grade C | ISO 4016 / DIN 601 |
| M20 | 2.5 | 30.0 | 33.53 | 12.72 | Grade C | ISO 4016 / DIN 601 |
| M22 | 2.5 | 32.0 | 35.72 | 14.5 | Grade C | ISO 4016 / DIN 601 |
| M24 | 3.0 | 36.0 | 39.55 | 15.35 | Grade C | ISO 4016 / DIN 601 |
| M27 | 3.0 | 41.0 | 45.2 | 17.92 | Grade C | ISO 4016 / DIN 601 |
| M30 | 3.5 | 46.0 | 50.85 | 19.75 | Grade C | ISO 4016 / DIN 601 |
| M36 | 4.0 | 55.0 | 60.79 | 23.35 | Grade C | ISO 4016 / DIN 601 |
| M42 | 4.5 | 65.0 | 71.3 | 27.05 | Grade C | ISO 4016 / DIN 601 |
| M48 | 5.0 | 75.0 | 82.6 | 31.07 | Grade C | ISO 4016 / DIN 601 |