For vented vacuum screws in Property Class 12.9 Steel, the controlling selection factors are corrosion exposure, strength requirement and service temperature. The grade data for Property Class 12.9 Steel (ISO 898-1 property class 12.9) is summarized below together with every size supplied.
Why Choose Property Class 12.9 Steel for Vented Vacuum Screws
The highest common strength class, for high-load machine assembly. For vented vacuum screws, this matters when requires plating or black-oxide protection is the primary requirement.
Mechanical & Physical Properties
| Grade designation | ISO 898-1 property class 12.9 |
|---|---|
| Magnetic response | Magnetic |
| Service temperature | commonly limited to approx. +300 °C; confirm against the coating and the load |
| Corrosion characteristic | Requires plating or black-oxide protection |
Corrosion Behavior in Service
Carbon and alloy steel vented vacuum screws require a coating for corrosion protection. Zinc plating (with or without passivation) is the most common; hot-dip galvanizing is used for outdoor structural service; black-oxide is mainly a tarnish-prevention finish for tool-room use.
Galvanic & Galling Considerations
For vented vacuum screws in steel, the dominant compatibility issue is hydrogen embrittlement at high property classes (10.9 and above) when electroplated. Plating must be followed by an appropriate baking treatment, or a non-electroplated finish (mechanical zinc, zinc flake) should be substituted.
Sizes of Vented Vacuum Screws Available in Property Class 12.9 Steel
| Thread size | Pitch (mm) | Head diameter dk (mm) | Head height k (mm) | Hex socket s (mm) | Vent hole diameter (mm) | Common length range (mm) | Reference standard |
|---|---|---|---|---|---|---|---|
| M3 | 0.5 | 5.5 | 3.0 | 2.5 | 0.8 | 6~30 | ISO 4762 vented |
| M4 | 0.7 | 7.0 | 4.0 | 3 | 1.0 | 8~40 | ISO 4762 vented |
| M5 | 0.8 | 8.5 | 5.0 | 4 | 1.2 | 10~50 | ISO 4762 vented |
| M6 | 1.0 | 10.0 | 6.0 | 5 | 1.5 | 10~60 | ISO 4762 vented |
| M8 | 1.25 | 13.0 | 8.0 | 6 | 2.0 | 12~80 | ISO 4762 vented |
| M10 | 1.5 | 16.0 | 10.0 | 8 | 2.5 | 16~80 | ISO 4762 vented |
