Property Class 8.8 Steel All-Metal Hex Flange Lock Nuts are supplied to ISO 898-1 property class 8.8. Corrosion behaviour is requires plating (zinc) for corrosion protection, the material is magnetic, and the usable service range is commonly limited to approx. +300 °C; confirm against the coating and the load. In practice this grade is the workhorse medium-carbon alloy class for structural joints.
- Grade
- ISO 898-1 property class 8.8
- Corrosion resistance
- Requires plating (zinc) for corrosion protection
- Magnetic response
- Magnetic
- Service temperature
- commonly limited to approx. +300 °C; confirm against the coating and the load
Property values are typical for the grade. Certified mechanical test data is available on request for production orders.
Property Class 8.8 Steel All-Metal Hex Flange Lock Nuts combine the dimensional form of GB/T 6187 / DIN 6927 / ASME B18.2.2 with the material properties of grade ISO 898-1 property class 8.8: requires plating (zinc) for corrosion protection, magnetic, service range commonly limited to approx. +300 °C; confirm against the coating and the load. This page summarizes the grade data, its corrosion behavior in service, the comparable grades, and the sizes supplied.
Why Choose Property Class 8.8 Steel for All-Metal Hex Flange Lock Nuts
The workhorse medium-carbon alloy class for structural joints. For all-metal hex flange lock nuts, this matters when requires plating (zinc) for corrosion protection is the primary requirement.
Mechanical & Physical Properties
| Grade designation | ISO 898-1 property class 8.8 |
|---|
| Magnetic response | Magnetic |
|---|
| Service temperature | commonly limited to approx. +300 °C; confirm against the coating and the load |
|---|
| Corrosion characteristic | Requires plating (zinc) for corrosion protection |
|---|
Galvanic & Galling Considerations
For all-metal hex flange lock nuts in steel, the dominant compatibility issue is hydrogen embrittlement at high property classes (10.9 and above) when electroplated. Plating must be followed by an appropriate baking treatment, or a non-electroplated finish (mechanical zinc, zinc flake) should be substituted.
Comparable Grades
For All-Metal Hex Flange Lock Nuts, class 10.9 or 12.9 is the comparable strength step. Move up when the joint preload approaches the proof load of the current class; move down when the joint is over-specified. For corrosion-critical service, switch to stainless A2 or A4.
Sizes of All-Metal Hex Flange Lock Nuts Available in Property Class 8.8 Steel
| Strength class | Material | Locking method | Finish options | Service |
|---|
| 8 | carbon steel | deformed all-metal thread | black oxide or zinc | general vibration-exposed joints |
| 10 | carbon steel or alloy steel | deformed all-metal thread | black oxide or zinc | higher-preload vibration service |
| 12 | alloy steel | deformed all-metal thread | black oxide or zinc | high-temperature and high-preload service |
Dimensions are independent of the material: every size above is available in Property Class 8.8 Steel.
Custom manufacturing · Made to drawing
Need this nut in a grade that is not listed?
Grade 8 8 Steel is one of the grades the catalog describes. Height and across-flats are the two most often changed — a thinner nut for clearance, a larger hex for a tool that is already on the line. Made by cold heading or tapping.
Minimum order from 2,000 pieces; samples within 7 days of drawing approval.
Custom nut manufacturingSend a drawing
Applications & Industries
The sectors that buy All-Metal Hex Flange Lock Nuts to GB/T 6187 / DIN 6927 / ASME B18.2.2, and the duty each one buys them for. Stocked from 8 to 12 (nominal diameter).
Industries that specify All-Metal Hex Flange Lock Nuts
-
Vehicle chassis
Prevailing torque plus a flange bearing face in one part.
-
Rotating machinery
Vibration resistance without a separate lock washer.
-
Heavy equipment
Class 10 and 12 for higher preload joints.
-
Exhaust and hot assemblies
All-metal locking survives temperatures that destroy a nylon insert.
-
Machine building & OEM
The clamping counter-face on studs and bolts throughout an assembly.
-
Steel fabrication
Bolted structural and frame connections.
Typical applications
- selecting class 8, 10 or 12 against the bolt grade
- using it where service temperature rules out nylon
- checking the flange seats fully on the joint face
- replacing a nut plus lock washer with one flanged part
- completing a bolted joint on a stud, rod or bolt
- locking an adjustment so it cannot drift
Service conditions to specify against
- Marine and coastal
- Available in A4 (316) stainless for chloride exposure — coastal structures, pool halls, water treatment and deck hardware, where A2 will eventually pit.
- High load
- Supplied in ISO 898-1 property classes, so the joint can be designed to a stated proof load and tightened to a calculated torque rather than by feel.
- Vibration
- Specified where cyclic load would loosen a plain nut or screw — rotating plant, rail, mobile equipment and anything that is not re-torqued in service.
- Match the class
- A nut below the bolt property class strips before the bolt reaches its own limit — pair class 8 nuts with 8.8 bolts, class 10 with 10.9.
Where to use something else
- Do not re-use an all-metal lock nut indefinitely; the deformed thread loses prevailing torque each time it is run on.
Full application guide: where All-Metal Hex Flange Lock Nuts are used, how to specify them, and the cases they are wrong for