When Needle Roller Bearing — ISO / DIN (Series 133) are required in Grade 8.8 Steel, the alternative grades and the trade-offs between them matter as much as the dimensions. This page covers both, plus mechanical and corrosion data.
Why Choose Grade 8.8 Steel for Needle Roller Bearing — ISO / DIN (Series 133)
The workhorse medium-carbon alloy grade for structural joints. For needle roller bearing — iso / din (series 133), this matters when requires plating (zinc) for corrosion protection is the primary requirement.
Mechanical & Physical Properties
| Grade designation | class 8.8 |
|---|---|
| Magnetic response | Magnetic |
| Service temperature | up to approx. +300 °C |
| Corrosion characteristic | Requires plating (zinc) for corrosion protection |
Corrosion Behavior in Service
Carbon and alloy steel needle roller bearing — iso / din (series 133) require a coating for corrosion protection. Zinc plating (with or without passivation) is the most common; hot-dip galvanizing is used for outdoor structural service; black-oxide is mainly a tarnish-prevention finish for tool-room use.
Galvanic & Galling Considerations
For needle roller bearing — iso / din (series 133) in steel, the dominant compatibility issue is hydrogen embrittlement at high property classes (10.9 and above) when electroplated. Plating must be followed by an appropriate baking treatment, or a non-electroplated finish (mechanical zinc, zinc flake) should be substituted.
Sizes of Needle Roller Bearing — ISO / DIN (Series 133) Available in Grade 8.8 Steel
| Bore d (mm) | Outer diameter D (mm) | Width B (mm) | Dynamic load C (kN) | Reference standard |
|---|---|---|---|---|
| 8 | 15 | 12 | 7.2 | ISO 1206 / GB/T 309 |
| 10 | 17 | 12 | 8.3 | ISO 1206 / GB/T 309 |
| 12 | 19 | 12 | 9.65 | ISO 1206 / GB/T 309 |
| 15 | 23 | 12 | 12.5 | ISO 1206 / GB/T 309 |
| 20 | 28 | 16 | 18.7 | ISO 1206 / GB/T 309 |
| 25 | 33 | 16 | 22.8 | ISO 1206 / GB/T 309 |
| 30 | 40 | 20 | 33.0 | ISO 1206 / GB/T 309 |
| 40 | 50 | 20 | 42.5 | ISO 1206 / GB/T 309 |