This page covers M18 Thin Hex Nut to GB/T 6172.1 / ISO 4035: the full dimensional row, hole and tool sizes, proof-load data and typical applications. All values are taken from the governing standards (GB/T 6172.1 / ISO 4035 together with ISO 273, ISO 724 and ISO 898-1 where applicable).
M18 Dimensional Row (GB/T 6172.1 / ISO 4035)
| Size | Pitch (mm) | Width across flats s (mm) | Width across corners e (mm) | Nut height m (mm) | Reference standard |
|---|---|---|---|---|---|
| M18 | 2.5 | 27.0 | 30.14 | 9.0 | ISO 4035 / GB/T 6172 |
Spanner & Drive for M18 Thin Hex Nut — GB/T 6172.1 / ISO 4035 (Series 055)
M18 Thin Hex Nut — GB/T 6172.1 / ISO 4035 (Series 055) have a width across flats of 27.0 mm — fit a 27.0 mm open-ended spanner or socket. Use a 6-point socket for tight clearances and to reduce rounding; for repeated assembly choose a torque wrench so the joint preload is repeatable.
Common Applications for M18 Thin Hex Nut — GB/T 6172.1 / ISO 4035 (Series 055)
M18 Thin Hex Nut — GB/T 6172.1 / ISO 4035 (Series 055) are commonly specified for structural joints, flange connections and heavy equipment foundations.
Installation Tips for M18 Thin Hex Nut — GB/T 6172.1 / ISO 4035 (Series 055)
- Use a 6-point socket where access allows — 12-point sockets are more prone to rounding the corners on smaller sizes.
- On flanged or serrated variants, do NOT add a separate flat washer — the flange already spreads the load and the washer can defeat the locking serrations.
- At M18 the stretch in the bolt becomes the controlling factor — for critical joints, use angle-controlled or stretch-controlled tightening instead of pure torque.
Mating Parts for M18
Pair M18 with the matching M18 bolt or screw, plus a M18 flat washer where required to distribute load on softer materials.