Skip to content
info@engineeringhardware.com
Request a Quote

Washers · ISO 7089 / ISO 7093

M24 Flat Washers Dimensions & Specifications

M24 Flat Washers Dimensions & Specifications reference image

M24 is one of the standard coarse-thread sizes for flat washers under ISO 7089 / ISO 7093. The sections below reproduce the dimensional row, list the matching tools and hole sizes, and summarize where this size is normally specified.

M24 Dimensional Row (ISO 7089 / ISO 7093)

For bolt sizeInner diameter d1 min (mm)Outer diameter d2 max (mm)Thickness h (mm)Reference standard
M2425.044.04.0ISO 7089

Spanner & Drive for M24 Flat Washers

Drive geometry for M24 Flat Washers is given by the row above; match the tool to the listed values.

Common Applications for M24 Flat Washers

M24 Flat Washers are commonly specified for high-load load-spreading on structural joints.

Installation Tips for M24 Flat Washers

  • At M24 the stretch in the bolt becomes the controlling factor — for critical joints, use angle-controlled or stretch-controlled tightening instead of pure torque.

Mating Parts for M24

A M24 flat washer pairs with a M24 bolt/screw and matching M24 nut.

Technical Drawing

Customize the parameters below — every spec field is editable, and the drawing redraws to match the values you choose. Changing the size will snap the other fields to that size's standard values; you can then override any individual value.

Sends the selected values to the quote form below.

Request a Quote

Adjust the parameters in the drawing above and click "Request this configuration" to send the exact specification straight to this form.

Request a Quotation

Specification
Business Information

Dimensions & Specifications (ISO 7089 / ISO 7093)

For bolt sizeInner diameter d1 min (mm)Outer diameter d2 max (mm)Thickness h (mm)Reference standard
M1.61.74.00.3ISO 7089
M22.25.00.3ISO 7089
M2.52.76.00.5ISO 7089
M33.27.00.5ISO 7089
M3.53.78.00.5ISO 7089
M44.39.00.8ISO 7089
M55.310.01.0ISO 7089
M66.412.01.6ISO 7089
M77.414.01.6ISO 7089
M88.416.01.6ISO 7089
M1010.520.02.0ISO 7089
M1213.024.02.5ISO 7089
M1415.028.02.5ISO 7089
M1617.030.03.0ISO 7089
M1819.034.03.0ISO 7089
M2021.037.03.0ISO 7089
M2223.039.03.0ISO 7089
M2425.044.04.0ISO 7089
M2728.050.04.0ISO 7089
M3031.056.04.0ISO 7089
M3334.060.05.0ISO 7089
M3637.066.05.0ISO 7089
M3940.072.06.0ISO 7089
M4243.078.07.0ISO 7089
M4546.085.07.0ISO 7089
M4850.092.08.0ISO 7089
M5254.098.08.0ISO 7089
M5658.0105.09.0ISO 7089
M6062.0110.09.0ISO 7089
M6466.0115.09.0ISO 7089
M55.315.01.0ISO 7093 large series
M66.418.01.6ISO 7093 large series
M88.424.02.0ISO 7093 large series
M1010.530.02.5ISO 7093 large series
M1213.037.03.0ISO 7093 large series
M1617.050.03.0ISO 7093 large series
M2021.060.04.0ISO 7093 large series
M2425.072.05.0ISO 7093 large series

Frequently Asked Questions

What clearance and tapping drill suit M24?

Use a 26 mm clearance hole (ISO 273 medium) for through-fixing, or a 21 mm tapping drill for a coarse M24 thread.

Should M24 Flat Washers be tightened by torque or by angle?

For critical structural joints at M24, angle-controlled or stretch-controlled tightening is more repeatable than pure torque — the friction scatter at large diameters can dominate the torque signal.

What grip range is typical for M24 structural bolts?

Grip ranges are highly application-dependent at M24. As a guide, choose a length that gives at least 1× the thread diameter engagement in the nut plus 2–3 thread pitches projecting.

Which washer dimensions matter most for M24?

For a flat washer, the outside diameter (the bearing surface) and the thickness control how the load is spread under the head and how much elastic preload is preserved. The inside diameter must clear the bolt body but not be so large that the head bears mostly on the washer's outer rim.

How do I request a quotation?

Use the technical drawing on this page to pick the exact configuration, then submit it with the quote form. We respond within one business day.