Skip to content
info@engineeringhardware.com
Request a Quote

Washers · GB/T 97.1 / ISO 7089

M5 General Flat Washer Dimensions & Specifications

M5 General Flat Washer Dimensions & Specifications reference image

M5 is one of the standard coarse-thread sizes for general flat washer under GB/T 97.1 / ISO 7089. The sections below reproduce the dimensional row, list the matching tools and hole sizes, and summarize where this size is normally specified.

M5 Dimensional Row (GB/T 97.1 / ISO 7089)

For bolt sizeInner diameter d1 (mm)Outer diameter d2 (mm)Thickness t (mm)Reference standard
M55.310.01.0ISO 7089 / GB/T 97.1

Spanner & Drive for M5 General Flat Washer — GB/T 97.1 / ISO 7089 (Series 087)

Drive geometry for M5 General Flat Washer — GB/T 97.1 / ISO 7089 (Series 087) is given by the row above; match the tool to the listed values.

Common Applications for M5 General Flat Washer — GB/T 97.1 / ISO 7089 (Series 087)

M5 General Flat Washer — GB/T 97.1 / ISO 7089 (Series 087) are commonly specified for small electronics hardware and precision assemblies.

Installation Tips for M5 General Flat Washer — GB/T 97.1 / ISO 7089 (Series 087)

  • At M5 the joint is sensitive to over-torque — use a torque-limiting driver and check the head doesn't bury into a softer counterpart.

Mating Parts for M5

A M5 flat washer pairs with a M5 bolt/screw and matching M5 nut.

Technical Drawing

Customize the parameters below — every spec field is editable, and the drawing redraws to match the values you choose. Changing the size will snap the other fields to that size's standard values; you can then override any individual value.

Sends the selected values to the quote form below.

Request a Quote

Adjust the parameters in the drawing above and click "Request this configuration" to send the exact specification straight to this form.

Request a Quotation

Specification
Business Information

Dimensions & Specifications (GB/T 97.1 / ISO 7089)

For bolt sizeInner diameter d1 (mm)Outer diameter d2 (mm)Thickness t (mm)Reference standard
M33.27.00.5ISO 7089 / GB/T 97.1
M44.39.00.8ISO 7089 / GB/T 97.1
M55.310.01.0ISO 7089 / GB/T 97.1
M66.412.01.6ISO 7089 / GB/T 97.1
M88.416.01.6ISO 7089 / GB/T 97.1
M1010.520.02.0ISO 7089 / GB/T 97.1
M1213.024.02.5ISO 7089 / GB/T 97.1
M1415.028.02.5ISO 7089 / GB/T 97.1
M1617.030.03.0ISO 7089 / GB/T 97.1
M1819.034.03.0ISO 7089 / GB/T 97.1
M2021.037.03.0ISO 7089 / GB/T 97.1
M2425.044.04.0ISO 7089 / GB/T 97.1
M3031.056.04.0ISO 7089 / GB/T 97.1
M3637.066.05.0ISO 7089 / GB/T 97.1

Frequently Asked Questions

Is M5 General Flat Washer — GB/T 97.1 / ISO 7089 (Series 087) suitable for electronics and small mechanisms?

M5 General Flat Washer — GB/T 97.1 / ISO 7089 (Series 087) is in the micro range and is widely used in electronics, instrument enclosures and small precision mechanisms. Watch the over-torque margin — micro joints strip easily.

What's the typical proof load behavior of M5 class 8.8?

Micro-thread joints are sensitive to plastic deformation in the first turn under load — use a torque-limiting driver and check the bearing surface deformation on softer mating materials.

Which washer dimensions matter most for M5?

For a flat washer, the outside diameter (the bearing surface) and the thickness control how the load is spread under the head and how much elastic preload is preserved. The inside diameter must clear the bolt body but not be so large that the head bears mostly on the washer's outer rim.

What is the coarse-thread pitch of M5 for General Flat Washer — GB/T 97.1 / ISO 7089 (Series 087)?

For M5 the standard coarse pitch is 0.8 mm — this is the value used for General Flat Washer — GB/T 97.1 / ISO 7089 (Series 087).

How do I request a quotation?

Use the technical drawing on this page to pick the exact configuration, then submit it with the quote form. We respond within one business day.