M5 Helical Thread Inserts are manufactured to DIN 8140 with a coarse thread pitch of 0.8 mm. This page lists the controlling dimensions for the M5 size — head geometry, width across flats, matching spanner size — together with the clearance hole, tapping drill and tightening torque used at assembly.
M5 Dimensional Row (DIN 8140)
| Thread size | Pitch (mm) | Length (mm) | Drill / tap size (mm) | Free coil diameter (mm) | Reference standard | Notes |
|---|---|---|---|---|---|---|
| M5 | 0.8 | 7.5 | 5.3 (STI tap) | 5.67 | DIN 8140 / ISO 10130 | Wire thread insert, 1.5xD length; tang break-off |
Spanner & Drive for M5 Helical Thread Inserts
Drive geometry for M5 Helical Thread Inserts is given by the row above; match the tool to the listed values.
Common Applications for M5 Helical Thread Inserts
M5 Helical Thread Inserts are commonly specified for general engineering applications.
Installation Tips for M5 Helical Thread Inserts
- At M5 the joint is sensitive to over-torque — use a torque-limiting driver and check the head doesn't bury into a softer counterpart.
When to Step Up or Down from M5
When the joint preload approaches the proof load of M5 class 8.8, step up to M6 class 8.8 (or move to M5 class 10.9). When the joint is over-specified, M4 often saves weight and cost without losing the safety margin.