Dimensional data for M6 Lifting Eye Bolt to GB/T 825 / DIN 580, with the rated working load limit and the notes for safe installation.
Values are taken from the governing standard rather than from a general machine-thread table, because this type is not selected on one.
M6 Dimensional Row (GB/T 825 / DIN 580)
| Size | Pitch (mm) | Length L (mm) | Head diameter dk (mm) | Head height k (mm) | Hex socket s (mm) | Reference standard |
|---|
| M6 | 1.0 | 40 | 10.0 | 6 | 5.0 | ISO 4762 / GB/T 70.1 |
Mating Parts for M6
For M6, pair with a M6 hex nut (ISO 4032 / DIN 934) and, where used, a M6 flat washer (ISO 7089 / DIN 125A) under the head and under the nut.
Custom manufacturing · Made to drawing
Need lifting eye bolt in a size this table does not list?
This page covers M6 lifting eye bolt. Dimensions, material, finish and form are specified from the drawing — a screw outside the standard range is a variation on existing tooling rather than a new design. Made by cold heading or warm forging.
Minimum order from 2,000 pieces; samples within 7 days of drawing approval.
Custom screw manufacturingSend a drawing
Applications & Industries for M6 Lifting Eye Bolt
Lifting Eye Bolt are bought for a small number of well-defined jobs. These are the ones we ship them for. Stocked from M3 to M36.
Industries that specify Lifting Eye Bolt
-
Machine installation
Lifting points on gearboxes, motors and fabrications.
-
Marine & offshore
Tie-down and anchor points in a corrosive environment.
-
Lifting & materials handling
Rated attachment points for slings, hooks and shackles.
Typical applications
- tie-down and securing points within a stated WLL
- providing a rated lifting point on a threaded hole
Service conditions to specify against
- Marine and coastal
- Available in A4 (316) stainless for chloride exposure — coastal structures, pool halls, water treatment and deck hardware, where A2 will eventually pit.
- Working load limit
- Rated by WLL and by the angle of pull — an eye loaded off-axis carries a fraction of its straight rating.
Need help matching Lifting Eye Bolt to your application? Send the assembly, the load and the environment with your enquiry and we will specify the size, material and finish against them.
