Skip to content
info@engineeringhardware.com
Request a Quote

Rigging Hardware · ISO / DIN

ISO Wire Rope Dimensions

ISO Wire Rope Dimensions reference image

ISO covers the dimensional requirements for wire rope. Reproduced below: the complete size table, the tolerance grades, and the companion and equivalent standards referenced when ordering to this document.

ISO — Scope

ISO specifies the dimensions and tolerances of wire rope — iso / din (series 152). Material, property class, surface finish and packaging are governed by separate documents in the same standards family (for example ISO 898-1 for the mechanical property classes of bolts and screws).

Tolerance & Product Grades

ISO, alongside the related ISO / DIN entries on this site, specifies product grades (typically A or B for fine work and C for general engineering) and tolerance classes for the controlling dimensions. Choose the grade against the precision your application requires.

Dimensions Specified by ISO

Nominal diameter (mm)ConstructionMin breaking force (kN)Mass (kg/100m)MaterialReference standard
46x78.955.85Galvanized steelGB/T 20118 / ISO 2408
56x713.48.94Galvanized steelGB/T 20118 / ISO 2408
66x1917.613.0Galvanized steelGB/T 20118 / ISO 2408
86x1931.323.0Galvanized steelGB/T 20118 / ISO 2408
106x1948.536.0Galvanized steelGB/T 20118 / ISO 2408
126x1969.552.0Galvanized steelGB/T 20118 / ISO 2408
166x3711989.0Galvanized steelGB/T 20118 / ISO 2408
206x37185138.0Galvanized steelGB/T 20118 / ISO 2408
246x37265196.0Galvanized steelGB/T 20118 / ISO 2408

Equivalent Standards

Where direct equivalents exist (ISO ↔ DIN, ISO ↔ ASME), they are listed on the parent Wire Rope — ISO / DIN (Series 152) page. Always confirm against the dimensions on this page, since some "equivalent" standards differ in tolerances and head geometry.

When to Specify ISO

Choose ISO for international engineering work and OEM supply where ISO standards are the contractual reference. It is the default modern specification for wire rope — iso / din (series 152).

Technical Drawing

Customize the parameters below — every spec field is editable, and the drawing redraws to match the values you choose. Changing the size will snap the other fields to that size's standard values; you can then override any individual value.

Sends the selected values to the quote form below.

Request a Quote

Adjust the parameters in the drawing above and click "Request this configuration" to send the exact specification straight to this form.

Request a Quotation

Specification
Business Information

Dimensions & Specifications (ISO / DIN)

Nominal diameter (mm)ConstructionMin breaking force (kN)Mass (kg/100m)MaterialReference standard
46x78.955.85Galvanized steelGB/T 20118 / ISO 2408
56x713.48.94Galvanized steelGB/T 20118 / ISO 2408
66x1917.613.0Galvanized steelGB/T 20118 / ISO 2408
86x1931.323.0Galvanized steelGB/T 20118 / ISO 2408
106x1948.536.0Galvanized steelGB/T 20118 / ISO 2408
126x1969.552.0Galvanized steelGB/T 20118 / ISO 2408
166x3711989.0Galvanized steelGB/T 20118 / ISO 2408
206x37185138.0Galvanized steelGB/T 20118 / ISO 2408
246x37265196.0Galvanized steelGB/T 20118 / ISO 2408

Frequently Asked Questions

When did ISO last revise its dimensional table?

ISO standards for wire rope — iso / din (series 152) are reviewed on roughly a five-year cycle. Always reference the latest published edition (or the edition cited contractually); the dimensional table on this page reflects the current commercially-supplied form.

What does ISO specify for Wire Rope — ISO / DIN (Series 152)?

ISO specifies the dimensions and tolerances of wire rope — iso / din (series 152). Material and property class are governed by separate standards in the same family.

What product grades does ISO define?

ISO typically distinguishes product grades for precision (A/B) and general engineering (C). The selection for Wire Rope — ISO / DIN (Series 152) depends on the precision your application requires.

Does ISO specify the mechanical strength?

No. ISO controls only the geometry of wire rope — iso / din (series 152). The mechanical strength is set by ISO 898-1 (bolts / screws) or ISO 898-2 (nuts), and the finish is governed by separate standards.

How do I request a quotation?

Use the technical drawing on this page to pick the exact configuration, then submit it with the quote form. We respond within one business day.