Skip to content
info@engineeringhardware.com
Request a Quote

Rigging Hardware · ISO / DIN

ISO Wire Rope Clip (U-Bolt) — ISO / DIN (Series 157)

For Wire Rope Clip (U-Bolt) — ISO / DIN (Series 157), ISO defines dimensions, tolerances and product grades. The sections below describe its scope, what it does NOT cover, and the equivalents across DIN, ISO and ASME.

ISO — Scope

ISO specifies the dimensions and tolerances of wire rope clip (u-bolt) — iso / din (series 157). Material, property class, surface finish and packaging are governed by separate documents in the same standards family (for example ISO 898-1 for the mechanical property classes of bolts and screws).

Tolerance & Product Grades

ISO, alongside the related ISO / DIN entries on this site, specifies product grades (typically A or B for fine work and C for general engineering) and tolerance classes for the controlling dimensions. Choose the grade against the precision your application requires.

Dimensions Specified by ISO

For rope diameter (mm)U-bolt diameter (mm)Saddle width (mm)Bolt threadWorking load limit (kg)Reference standard
6M516M560DIN 1142 / GB/T 5976
8M620M6110DIN 1142 / GB/T 5976
10M826M8180DIN 1142 / GB/T 5976
12M1032M10260DIN 1142 / GB/T 5976
16M1238M12460DIN 1142 / GB/T 5976
20M1445M14720DIN 1142 / GB/T 5976
24M1655M161050DIN 1142 / GB/T 5976
30M2070M201640DIN 1142 / GB/T 5976

Equivalent Standards

Where direct equivalents exist (ISO ↔ DIN, ISO ↔ ASME), they are listed on the parent Wire Rope Clip (U-Bolt) — ISO / DIN (Series 157) page. Always confirm against the dimensions on this page, since some "equivalent" standards differ in tolerances and head geometry.

When to Specify ISO

Choose ISO for international engineering work and OEM supply where ISO standards are the contractual reference. It is the default modern specification for wire rope clip (u-bolt) — iso / din (series 157).

Technical Drawing

Customize the parameters below — every spec field is editable, and the drawing redraws to match the values you choose. Changing the size will snap the other fields to that size's standard values; you can then override any individual value.

Sends the selected values to the quote form below.

Request a Quote

Adjust the parameters in the drawing above and click "Request this configuration" to send the exact specification straight to this form.

Request a Quotation

Specification
Business Information

Dimensions & Specifications (ISO / DIN)

For rope diameter (mm)U-bolt diameter (mm)Saddle width (mm)Bolt threadWorking load limit (kg)Reference standard
6M516M560DIN 1142 / GB/T 5976
8M620M6110DIN 1142 / GB/T 5976
10M826M8180DIN 1142 / GB/T 5976
12M1032M10260DIN 1142 / GB/T 5976
16M1238M12460DIN 1142 / GB/T 5976
20M1445M14720DIN 1142 / GB/T 5976
24M1655M161050DIN 1142 / GB/T 5976
30M2070M201640DIN 1142 / GB/T 5976

Frequently Asked Questions

Can I substitute ISO for the corresponding DIN standard on a drawing?

On modern drawings the ISO standard is the master reference; the older DIN equivalent is a cross-reference. For most dimensional purposes the parts are interchangeable, but check tolerance grades and the head height — these are the most common points of divergence.

When did ISO last revise its dimensional table?

ISO standards for wire rope clip (u-bolt) — iso / din (series 157) are reviewed on roughly a five-year cycle. Always reference the latest published edition (or the edition cited contractually); the dimensional table on this page reflects the current commercially-supplied form.

What does ISO specify for Wire Rope Clip (U-Bolt) — ISO / DIN (Series 157)?

ISO specifies the dimensions and tolerances of wire rope clip (u-bolt) — iso / din (series 157). Material and property class are governed by separate standards in the same family.

What product grades does ISO define?

ISO typically distinguishes product grades for precision (A/B) and general engineering (C). The selection for Wire Rope Clip (U-Bolt) — ISO / DIN (Series 157) depends on the precision your application requires.

How do I request a quotation?

Use the technical drawing on this page to pick the exact configuration, then submit it with the quote form. We respond within one business day.